Static Analysis of V-12 Engine Cylinder Block Using FEM

Authors(1) :-Dr. B. Jayachandriah

The Cylinder Block forms the basic framework of the engine. It houses the engine cylinders, which serve as bearings and guides for the pistons reciprocating in them. The analysis of the engine block is to be carried-out to predict its behavior under static loading. The cylinder block has to with stand the stresses and deformations due to loads acting on it. An attempt is made in this paper to perform static analysis on V-12 Engine cylinder block to obtain the variation of the stresses and the deformations at different pressures of 8 MPa, 10 MPa, 12 MPa and 15 MPa on the Engine Cylinder Block. Three dimensional model of the Engine Cylinder Block was created using CATIA V5 R22 software and the mesh is generated using TET Elements. The Analysis of the Engine Cylinder Block is carried-out using Compacted Graphite cast Iron (CGI GJV 450) and NASA 398 (hypereutectic Al-Si alloy) materials using ABAQUS 6.14 software. The mechanical boundary conditions were applied to the Engine Cylinder Block and different pressures are applied and static analysis are analyzed. The results are observed for selecting the best suitable material for the Engine Cylinder Block From the analysis results, it gives a clear idea that the stress distributions in both the cases are nearly same. So in deformation point of view, CGI GJV 450 has less deformation and hence CGI GJV 450 is considered as the best material for Engine Cylinder

Authors and Affiliations

Dr. B. Jayachandriah
Professor, Mechanical Engineering, Sri Kalahasteeswara Institute of Technology, Srikalahasti, Chittoor, Andhra Pradesh, India

Engine Cylinder Block, CGI GJV 450, NASA 398, CATIA V5, ABAQUS/CAE, Static Analysis

  1. B. A. Devan, G. Ravindrareddy - "Thermal Analysis of Aluminum alloy piston" (IJETER),Vol.3 No.6, special issue of NCTET 2K15 - Held on June 13,2015 in SV College of Engg, Tirupati.
  2. Dr. K.H. Jatkar, Mr. Sunil S. Dhanwe - "Dynamic Analysis of single cylinder petrol engine" International Journal of Engineering Research and Applications (IJERA) ISSN:2248-9622 , Volume-3, Issue 3, May-June 2013, PP.1177-1183.
  3. K Anushka & Dr. B Jayachandraiah - "Thermal Analysis of Four stroke diesel IC engine piston by using ABAQUS Software " SKIT, Srikalahasti, Chittoor Dist, A.P, India 2014.
  4. Mukesh Annamneedi, Jithendra, - "Design and Analysis of four cylinder engine block by using F.E.A" International Journal & Maganizine of Engineering Technology, Management and Research, Volume No-3 (2016), ISSUE NO:9 (September).
  5. Nitin Kumar Srivastav, Ram Poojan Sahani, Amit Kumar, Girjesh Yadav, Rajoo Sahani, Prashant Kumar Mishra - " Finite Element Analysis of Piston Head by ABAQUS " (IJSER), Volume 6, ISSUE 5, May-2015.
  6. Suresh R, Anil Kumar BN, Shyam Sunder N, Shridhar Deshpande - "Thermo-mechanical analysis of engine block of IC engine", International Journal for Technological Research in Engineering Volume 2, Issue 11, July 2015, ISSN:2347-4718.
  7. Vikramakumar,V Harsure - "Dynamic analysis on motor cycle engine block" (IJSRD), Volume 4, ISSUE 09, 2016 ISSN(online):2321-0613.
  8. Wilson Luiz Guesser, Pedro Ventrela Duran, Walmor Krause - "Compacted Graphite Iron for diesel engine cylinder blocks", Congress le Diesel Aujourd’Hui et Demain Sur11 Ecole Central Lyon -12 et 13 May 2004.
  9. Y. Sathaiah, Gandhi Perumallapalli, D. Sreeramprasad - Dynamic analysis of Engine Block for Selection of suitable material for Cost & Weight Reduction " Volume 2, ISSUE 3 June 30, 2015.
  10. Yunxia Zhang, Qishan Feng , Jianwu Zhang, Li Zhong Shen - "Research on Dynamic Characteristics of the Cylinder block " International Journal for Vehicle Noise and Vibration, Volume-2, No.1, 2006.
  11. A text book of Internal Combustion Engines by V Ganesan, 3rd edition, Tata Mc Graw Hill Publications.
  12. A text book of Internal Combustion Engines by R.K. Rajput, 9/e, Lakshmi Publications.

Publication Details

Published in : Volume 4 | Issue 5 | March-April 2018
Date of Publication : 2018-04-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 1155-1162
Manuscript Number : IJSRST11845311
Publisher : Technoscience Academy

Print ISSN : 2395-6011, Online ISSN : 2395-602X

Cite This Article :

Dr. B. Jayachandriah, " Static Analysis of V-12 Engine Cylinder Block Using FEM ", International Journal of Scientific Research in Science and Technology(IJSRST), Print ISSN : 2395-6011, Online ISSN : 2395-602X, Volume 4, Issue 5, pp.1155-1162, March-April-2018.
Journal URL : https://ijsrst.com/IJSRST11845311
Citation Detection and Elimination     |      | |
  • Dr. K.H. Jatkar, Mr. Sunil S. Dhanwe - "Dynamic Analysis of single cylinder petrol engine" International Journal of Engineering Research and Applications (IJERA) ISSN:2248-9622 , Volume-3, Issue 3, May-June 2013, PP.1177-1183.
  • K Anushka & Dr. B Jayachandraiah - "Thermal Analysis of Four stroke diesel IC engine piston by using ABAQUS Software " SKIT, Srikalahasti, Chittoor Dist, A.P, India 2014.
  • Mukesh Annamneedi, Jithendra, - "Design and Analysis of four cylinder engine block by using F.E.A" International Journal & Maganizine of Engineering Technology, Management and Research, Volume No-3 (2016), ISSUE NO:9 (September).
  • Nitin Kumar Srivastav, Ram Poojan Sahani, Amit Kumar, Girjesh Yadav, Rajoo Sahani, Prashant Kumar Mishra - " Finite Element Analysis of Piston Head by ABAQUS " (IJSER), Volume 6, ISSUE 5, May-2015.
  • Suresh R, Anil Kumar BN, Shyam Sunder N, Shridhar Deshpande - "Thermo-mechanical analysis of engine block of IC engine", International Journal for Technological Research in Engineering Volume 2, Issue 11, July 2015, ISSN:2347-4718.
  • Vikramakumar,V Harsure - "Dynamic analysis on motor cycle engine block" (IJSRD), Volume 4, ISSUE 09, 2016 ISSN(online):2321-0613.
  • Wilson Luiz Guesser, Pedro Ventrela Duran, Walmor Krause - "Compacted Graphite Iron for diesel engine cylinder blocks", Congress le Diesel Aujourd’Hui et Demain Sur11 Ecole Central Lyon -12 et 13 May 2004.
  • Y. Sathaiah, Gandhi Perumallapalli, D. Sreeramprasad - Dynamic analysis of Engine Block for Selection of suitable material for Cost & Weight Reduction " Volume 2, ISSUE 3 June 30, 2015.
  • Yunxia Zhang, Qishan Feng , Jianwu Zhang, Li Zhong Shen - "Research on Dynamic Characteristics of the Cylinder block " International Journal for Vehicle Noise and Vibration, Volume-2, No.1, 2006.
  • A text book of Internal Combustion Engines by V Ganesan, 3rd edition, Tata Mc Graw Hill Publications.
  • A text book of Internal Combustion Engines by R.K. Rajput, 9/e, Lakshmi Publications.
  • " target="_blank"> BibTeX
    |
  • Dr. K.H. Jatkar, Mr. Sunil S. Dhanwe - "Dynamic Analysis of single cylinder petrol engine" International Journal of Engineering Research and Applications (IJERA) ISSN:2248-9622 , Volume-3, Issue 3, May-June 2013, PP.1177-1183.
  • K Anushka & Dr. B Jayachandraiah - "Thermal Analysis of Four stroke diesel IC engine piston by using ABAQUS Software " SKIT, Srikalahasti, Chittoor Dist, A.P, India 2014.
  • Mukesh Annamneedi, Jithendra, - "Design and Analysis of four cylinder engine block by using F.E.A" International Journal & Maganizine of Engineering Technology, Management and Research, Volume No-3 (2016), ISSUE NO:9 (September).
  • Nitin Kumar Srivastav, Ram Poojan Sahani, Amit Kumar, Girjesh Yadav, Rajoo Sahani, Prashant Kumar Mishra - " Finite Element Analysis of Piston Head by ABAQUS " (IJSER), Volume 6, ISSUE 5, May-2015.
  • Suresh R, Anil Kumar BN, Shyam Sunder N, Shridhar Deshpande - "Thermo-mechanical analysis of engine block of IC engine", International Journal for Technological Research in Engineering Volume 2, Issue 11, July 2015, ISSN:2347-4718.
  • Vikramakumar,V Harsure - "Dynamic analysis on motor cycle engine block" (IJSRD), Volume 4, ISSUE 09, 2016 ISSN(online):2321-0613.
  • Wilson Luiz Guesser, Pedro Ventrela Duran, Walmor Krause - "Compacted Graphite Iron for diesel engine cylinder blocks", Congress le Diesel Aujourd’Hui et Demain Sur11 Ecole Central Lyon -12 et 13 May 2004.
  • Y. Sathaiah, Gandhi Perumallapalli, D. Sreeramprasad - Dynamic analysis of Engine Block for Selection of suitable material for Cost & Weight Reduction " Volume 2, ISSUE 3 June 30, 2015.
  • Yunxia Zhang, Qishan Feng , Jianwu Zhang, Li Zhong Shen - "Research on Dynamic Characteristics of the Cylinder block " International Journal for Vehicle Noise and Vibration, Volume-2, No.1, 2006.
  • A text book of Internal Combustion Engines by V Ganesan, 3rd edition, Tata Mc Graw Hill Publications.
  • A text book of Internal Combustion Engines by R.K. Rajput, 9/e, Lakshmi Publications.
  • " target="_blank">RIS
    |
  • Dr. K.H. Jatkar, Mr. Sunil S. Dhanwe - "Dynamic Analysis of single cylinder petrol engine" International Journal of Engineering Research and Applications (IJERA) ISSN:2248-9622 , Volume-3, Issue 3, May-June 2013, PP.1177-1183.
  • K Anushka & Dr. B Jayachandraiah - "Thermal Analysis of Four stroke diesel IC engine piston by using ABAQUS Software " SKIT, Srikalahasti, Chittoor Dist, A.P, India 2014.
  • Mukesh Annamneedi, Jithendra, - "Design and Analysis of four cylinder engine block by using F.E.A" International Journal & Maganizine of Engineering Technology, Management and Research, Volume No-3 (2016), ISSUE NO:9 (September).
  • Nitin Kumar Srivastav, Ram Poojan Sahani, Amit Kumar, Girjesh Yadav, Rajoo Sahani, Prashant Kumar Mishra - " Finite Element Analysis of Piston Head by ABAQUS " (IJSER), Volume 6, ISSUE 5, May-2015.
  • Suresh R, Anil Kumar BN, Shyam Sunder N, Shridhar Deshpande - "Thermo-mechanical analysis of engine block of IC engine", International Journal for Technological Research in Engineering Volume 2, Issue 11, July 2015, ISSN:2347-4718.
  • Vikramakumar,V Harsure - "Dynamic analysis on motor cycle engine block" (IJSRD), Volume 4, ISSUE 09, 2016 ISSN(online):2321-0613.
  • Wilson Luiz Guesser, Pedro Ventrela Duran, Walmor Krause - "Compacted Graphite Iron for diesel engine cylinder blocks", Congress le Diesel Aujourd’Hui et Demain Sur11 Ecole Central Lyon -12 et 13 May 2004.
  • Y. Sathaiah, Gandhi Perumallapalli, D. Sreeramprasad - Dynamic analysis of Engine Block for Selection of suitable material for Cost & Weight Reduction " Volume 2, ISSUE 3 June 30, 2015.
  • Yunxia Zhang, Qishan Feng , Jianwu Zhang, Li Zhong Shen - "Research on Dynamic Characteristics of the Cylinder block " International Journal for Vehicle Noise and Vibration, Volume-2, No.1, 2006.
  • A text book of Internal Combustion Engines by V Ganesan, 3rd edition, Tata Mc Graw Hill Publications.
  • A text book of Internal Combustion Engines by R.K. Rajput, 9/e, Lakshmi Publications.
  • " target="_blank">CSV

    Article Preview