Analysis on Wheel Spoke With Aluminum Composite Materials
Keywords:
LM 25, LM25TB7, LM 25TE, LM25TFAbstract
Automobile parts one of the major important part is a wheel spoke because of all of the automobile parts carried by spokes. Heavy load carrying vehicles having high strength and good fatigue property spoke. In this work new spoke is designed and from five spokes to four spokes and comparing of these spokes by using new 4 aluminum composite materials LM 25, LM25TB7, LM 25TE, LM25TF. Comparing properties of stress and displacement with Magnesium Alloy (AM 60A). Model is developped in Unigraphics and analysis done in cosmos software. Finally absorbing in my project compare to all material what are the material using in this project the aluminum composite material LM25TF was good fatigue life, low stress and high displacement.
References
- Cuixia, Z. (2006). “Design and structural analysis of aluminum alloy wheel”, Ph.D Dissertation, Zhejiang University, Zhejiang.
- Angmo Wang - Yufa Chen - Chenzhi Wang - Qingzheng Wang (2009), “Fatigue Life Analysis of Aluminum Wheels by Simulation of Rotary Fatigue Test”, thesis in School of Mechanical Engineering, Nanjing University of Science & Technology, China.
- Ramamurty Raju, P., Satyanarayana, B., Ramji, K., Suresh Badu, K. (2007), “Evaluation of fatigue life of aluminum alloy wheels under radial loads”. Journal Engineering Failure Analysis, vol. 14, pp. 791-800.
- Wei-Chan Chang (2008), “Modeling for Impact Test of Aluminum Wheels”, Department of Mechanical Engineering National Central University Jhong-Li 32001, Taiwan, R.O.C
- M. Riesner and R. I. DeVries, “Finite Element Analysis and Structural Optimization of Vehicle Wheels”, Paper No. 830133P in Proceedings of International Congress & Exposition - Society of Automotive Engineers, Society of Automotive Engineers, Detroit, MI, 1993.
- H.-T. Chan, “Analysis of Impact Test for Aluminum Alloy Wheel,” M.S. Thesis, National Yunlin University of Science & Technology, 2006.
- W.-S. Tai, “The Stress Improvement and Design Optimization for the Structure of an Aluminum Wheel Rim,” M.S. Thesis, Dayeh University, 2006.
- N. Satyanarayana & Ch.Sambaiah (2012), “Fatigue Analysis of Aluminum Alloy Wheel Under Radial Load”, (IJMIE), ISSN No. 2231 –6477, Vol-2, Issue-1, 2012
- WU Li-hong1, LONG Si-yuan2, GUAN Shao-kang1 (2009), “Verification of Applying Mg-Alloy AM60B to Motorcycle Wheels with FEM”, College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
- Wu Lihong, Cao Hanxue, Long Siyuan. “Comparison of material properties of Mg and Al on service stress in light alloy road wheels’[J]. Material Science Forum, 2005, (6): 488-489; 885-888.
- Wu Lihong, Long Siyuan, Guan Shaokang. “Study on structural optimum technology of motorcycle Mg-alloy wheel”[J]. Machinery Design & Manufacture, 2006, (9):85-87. (in Chinese)
- Wu Lihong, Long Siyuan, Xu Shao-yong, et al. “Influences of Mg alloy and Al alloy on service stress in motorcycle wheel”[J]. Materials Science and Technology, 2007, 15(3): 397-100.
- Cleginaldo Pereira de Carvalho (2002), “Wheels – An Approach for Structural
- Analysis and Fatigue Life Prediction”, Journal of Mechanical Engineering 57(2011)1, 31-39.
- Msc. Shaymaa Mahmood (2011), Engineering Materials.
- National Instruments(2009), Static and Fatigue Structural Test Tutorial. www.ni.com.
- MOHD ZUL HAZMl BIN MHD FAUZY (2008), “Finite Element Analysis of Car Alloy Wheel”, thesis in UNIVERSITI TEKNIKAL MALAYSIA MELAKA.
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST
This work is licensed under a Creative Commons Attribution 4.0 International License.
