Design and Analysis of An Automotive Bumper
Keywords:
Bumper, Glass Material Thermoplastic, Pro-E , ANSYS, Expanded PolypropyleneAbstract
Bumpers play an important role in preventing the impact energy from being transferred to the automobile and passengers. Saving the impact energy in the bumper to be released in the environment reduces the damages of the automobile and passengers. The goal of this paper is to design a bumper with minimum weight by employing the Glass Material Thermoplastic (GMT) materials. This bumper either absorbs the impact energy with its deformation or transfers it perpendicular to the impact direction. To reach this aim, a mechanism is designed to convert about 80% of the kinetic impact energy to the spring potential energy and release it to the environment in the low impact velocity according to American standard. In addition, since the residual kinetic energy will be damped with the infinitesimal elastic deformation of the bumper elements, the passengers will not sense any impact. It should be noted that in this paper, modeling, and result
References
- Hosseinzadeh RM, Shokrieh M, and Lessard LB,“Parametric study od automotive composite bumper beams subjected to low-velocity impacts”, J. CompositeStuct., 68 (2005):419-427.
- Marzbanrad JM, Alijanpour M, and Kiasat MS, “Design and analysis of automotive bumper beam in low speed frontal crashesh”, Thin Walled Struct., 47 (2009): 902-911.
- Mohapatra S, “Rapid Design Solutions for Automotive Bumper Energy Absorbers using Morphing Technique”,Altair CAE users Conference 2005, Bangalore, India.
- Andersson R, Schedin E, Magnusson C, Ocklund J, “The Applicability of Stainless Steel for Crash Absorbing Components”, SAE Technical Paper, 2002.
- Butler M, Wycech J, Parfitt J, and Tan E, “Using Terocore Brand Structural Foam to Improve Bumper Beam Design”, SAE Technical Paper, 2002,
- Carley ME, Sharma AK, Mallela V, “Advancements in expanded polypropylene foam energy management for bumper systems”, SAE Technical Paper, 2004.
- Evans D and Morgan T, “Engineering Thermoplastic Energy for Bumpers”, SAE Paper, 1999.
- Witteman WJ, “Improved Vehicle Crashworthinessm Design by Control of the Energy Absorption for Different Collision Situations”, Doctoral dissertation, Eindhoven University of Technology, 2000.
- Masoumi A, Mohammad Hassan Shojaeefard, Amir Najibi, “Comparison of steel, aluminum and composite bonnet in terms of pedestrian head impact”College of Engineering, University of Tehran, Tehran,Iran, 2011: 1371-1380.
- Design Improvement In Front Bumper Of A Passenger Car Using Impact Analysis By Nitin S Motgi , International Journal of Instrumentation, Control and Automation (IJICA) ISSN: 2231-1890, Vol-1 Iss-3,4, 2012
- Nitin S. Gokhale, Sanjay S. Despande, Dr. Anand N. Thite, "Practical Finite Element Analysis", Finite To Infinite, India, 2007.
- Carley ME, Sharma AK, Mallela V, “Advancements in expanded polypropylene foam energy management for bumper systems”, SAE Technical Paper, 2004.
- Evans D and Morgan T, “Engineering Thermoplastic Energy for Bumpers”, SAE Paper, 1999.
- A Review on the Composite Materials used for Automotive Bumper in Passenger Vehicles by Alen John Vol-4, Issue-4, August-2014, ISSNNo.:2250-0758 International Journal of Engineering and Management Research,pg.no.98-101.
- Comparative analysis of frontal car bumper during impact by Bhavesh A. Bohra, IJAIEM ,Volume 3, Issue 12, December 2014 ISSN 2319 - 4847
- Crash Analysis of Car Cross Member Bumper Beam by Dr. A. Srinath, altair technology conference , K L University
- Zonghua Zhang, Shutian Liu, Zhiliang Tang, “Design optimization of cross-sectional configuration of ribreinforced thin-walled beam” Dalian University of Technology, Dalian, China. 2009.PP 868-878.
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST
This work is licensed under a Creative Commons Attribution 4.0 International License.
