Analysis and Optimization of A Roller Conveyor System by using Ceramic Materials

Authors

  • S. Murali Krishna  M.Tech, Department of Mechanical Engineering, SKD Engineering College, Gooty, Andhra Pradesh, India
  • Dr. R. Ramachandra  Supervisor, Principal & Professor, Department of Mechanical Engineering, SKD Engineering College, Gooty, Andhra Pradesh, India

Keywords:

Roller Conveyor System, Ceramic Materials, VSD, Health and Safety, CAD/CAM /CAE software, Parametric Technology Corporation

Abstract

A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Conveyors are especially useful in applications involving the transportation of heavy or bulky materials. Conveyor systems allow quick and efficient transportation for a wide variety of materials, which make them very popular in the material handling and packaging industries. The objectives of the project are to model the conveyor system to perform structural analysis to optimize parameters critical parts of roller conveyor system like Roller, chassis and support, to minimize the overall weight of assembly and material of the roller conveyor system, and compare the results with the existing system. The geometrical modeling is to done in Pro/E and Analysis is to done by using Ansys.

References

  1. S. M. Shinde [1], R.B. Patil [2] “Optimization Technique Used For The Roller Conveyor System For Weight Reduction” International Journal Of Engineering Research & Technology (Ijert) Vol. 1 Issue 5, July ? 2012.
  2. Pawar Jyotsna, 2d.D.Date, 3pratik Satav “Design And Optimization Of Roller In Belt Conveyor System For Weight Reduction” Irf International Conference, 01st June-2014, Pune, India, Isbn: 978-93-84209-23-0
  3. S.H. Masood, B. Abbas, E. Shayan ? A. Kara “An Investigation Into Design And Manufacturing Of Mechanical Conveyors Systems For Food Processing”, Springer-Verlag London Limited 2004.
  4. M. A. Alspaugh, “Latest Developments In Belt Conveyor Technology” Minexpo 2004, Las Vegas,Nv, Usa. September 27, 2004.
  5. John Usher, John R , G. Don Taylor “Availability Modeling Of Powered Roller Conveyors” University Of Arkansas, John Usher University Of Louisville G., Don Taylor Virginia Polytechnic Institute .
  6. Modeling Power & Free Conveyor Systems” Dev P. Sathyadev, Sanjay Upendram Eric Grajo, Ali Gunal, Onur Ulgen Production Modeling Corporation Dearborn, Michigan 481261.
  7. C.Sekimoto “Development Of Concept Design Cad System”, Energy And Mechanical Research Laboratories, Research And Development Center, Toshiba Corporation.
  8. Survey of research in modeling conveyor-based automated material handling systems in wafer Fabs Dima Nazzal, Ahmed El-Nashar Department of Industrial Engineering and management Systems, University of Central Florida.
  9. S. M. Shinde [1], R.B. Patil [2] “ Weight Optimization And Material Saving Of The Roller Conveyor System” International Journal Of Engineering Research & Development, Vol1,August 2012,Issn:2278-0211.
  10. Mr. Rajratna A. Bhalerao1, Dr. R.J. Patil2 “ Transient And Mode Shape Analysis Of Gravity Roller Conveyor For Weight Reduction”? Ijiset - International Journal Of Innovative Science, Engineering & Technology, Vol. 1 Issue 5, July 2014. Issn 2348 ? 7968.
  11. S. M. Shinde [1], R.B. Patil [2] “ Optimization Technique Used For The Roller Conveyor System For Weight Reduction” International Journal Of Engineering Research & Technology (Ijert) Vol. 1 Issue 5, July - 2012 Issn: 2278-0181.
  12. S.S. Gaikwad, 2e.N. Aitavade “Static Analysis Of A Roller Of Gravity Rollerconveyor For Structural Strength & Weight Optimization” Gaikwad, Et Al., International Journal Of Advanced Engineering Technology E-Issn 0976-3945.
  13. Anwar Badawy Badawy Abu-Sena , Mohamed Salah Al-Din Soliman, Omer Nazmi Ali Abdel-Nabi Behaviours And Resistance Of Beam Column Structural Elements (Journal of Constructional Steel Research 71 (2012) Pg 171?181)
  14. Cao Hung Pham, Gregory J. Hancock Experimental investigation & direct strength design of high strength complex C-section in pure bending (University of Sydney, ISSN-1833-2781, Jan. 2012)
  15. M.S. Deepak, R. Kandasamy, Dr. R. Thenmozhi Investigation of lateral ? torsional buckling of Cold-formed steel c-channel sections , (IETED-II, Vol 4, May 2012).
  16. Yogesh Tanajirao Padwal, 2mr. Satish M. Rajmane, 3swapnil S. Kulkarni “Design And Analysis Of A Roller Conveyor For Weight Optimization & Material Saving” Padwal, Et Al, International Journal Of Advanced Engineering Research And Studies E-Issn2249?8974.
  17. “Fatigue In The Shell Of A Conveyor Drum”, Ch. Affolter, G. Piskoty, R. Koller, M. Zgraggen, T.F. Rutti Empa, Swiss Federal Laboratories For Materials Testing And Research, Ueberlandstrasse 129, Ch-8600 Duebendorf, Switzerland. Received 31 August 2006; Accepted 30 November 2006, Available Online 12 February 2007.
  18. “Weight And Cost Oriented Multi-Objective Optimization Of Impact Damage Resistant Stiffened Composite Panels”. M. Corvino A, L. Iuspa A, A. Riccio B,*, F. Scaramuzzino ,A. Aerospace And Mechanics Engineering Department, Second University Of Naples (Sun), Via Roma, 30 81031 Aversa (Ce), Italy, B. Computational Mechanics Laboratory, C.I.R.A. (Italian Aerospace Research Center), Capua (Ce), Italy.
  19. “Enhanced Chain Dynamics In Loop-Sorting-Systems By Means Of Layout Optimization And A Kinematic Model Of The Polygon Action.” S?ren Emil S?rensen ? Michael R. Hansen,Morten K. Ebbesen ? Ole ?. Ouritsen,Received: 11 May 2011 / Revised: 29 October 2011 / Accepted:
  20. November 2011 / Published Online: 8 January 2012, Springer-Verlag 2011.
  21. Ying Wang, Chen Zhou “A Model And An Analytical Method For Conveyor System In Distribution Centers”, J Syst Sci Syst Eng (Dec 2010) 19(4): 408-429.
  22. Introduction To Finite Elements In Engineering- Ashok.D. Belegundu.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2017-10-31

Issue

Volume 3, Issue 7, September-October-2017

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
S. Murali Krishna, Dr. R. Ramachandra, " Analysis and Optimization of A Roller Conveyor System by using Ceramic Materials, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 3, Issue 7, pp.587-595, September-October-2017.