Improvement of Welding Penetration in MIG Welding

Authors

  • Abrar Zaidi  PG Student, Government Engineering College, Aurangabad, Maharashtra, India
  • Prof. K. R. Madavi  Assistant Professor Government Engineering College, Aurangabad, Maharashtra, India

Keywords:

MIG welding, plain carbon steel IS2062, Al2O3 and Fe2O3 chemicals.

Abstract

This investigation is to review the technique of using ACTIVATED FLUX for optimum penetration & hardness of MIG welding. Two kind of fluxes, Al2O3 and Fe2O3 used on a mild steel plates of 50mm x 50mm square and 8 mm thick. The fluxes used were packed in powered form & applied through a thin layer of flux. The experimental results indicates that the Activated metal inert gas (Activated MIG) welding penetration and welding hardness increased compared to normal Metal insert gas (MIG) welding also known as Gas Metal Arch Welding (GMAW).

References

  1. Satyaduttsin P. Chavda, Jayesh V. Desai, Tushar M. Patel "A Review On Parametric Optimization of MIG Welding for Medium Carbon Steel Using FEA-DOE Hybrid Modelling", International Journal for scientific research & development Vol 1, issue 9, 2013,pp.18431846
  2. Pawan Kumar, "Parametric Optimization of Gas Metal Arc Welding of Austenitic Stainless Steel (AISI 304) & Low Carbon Steel using Taguchi’s technique", International Journal of Engineering Research and Management research, Vol. 3, Issue 4, Aug 2013, pp.18-22
  3. Vikram singh, "An investigation for Gas Metal Arc Welding Optimum Parameters of mild steel AISI 1016 using Taguchi’s Method", International Journal of Engineering and advance technology, Vol.2, Issue 6, August 2013, pp.407-409
  4. Mr. Parth. D Patel, Prof. Sachin. P. Patel, "Prediction of Weld strength of Metal Active Gas (MAG) Welding using Artificial Neural", International Journal of Engineering Research and Applications, Vol.1, Issue 1, pp.036-044
  5. S. R Patil, C. A. Waghmare, "Optimization of MIG Welding Parameters for Improving Strength of Welded joints", International journal of advance research and studies, Vol.2, Issue IV, July-Sept., 2013, pp.14-16
  6. Ajit. Hooda, Ashwani Dhingra, Satpal. Sharma, "Optimization of MIG Welding Process Parameters to Predict Maximum Yield strength in AISI 1040", International Journal of mechanical engineering and robotics research, Vol. 1, 3October 2012, pp.203-213
  7. Neha Bhaduria, R. S. Ojha, "Optimization of Process Parameters for Weld Bead Penetration of IS 2062 Mild Steel for GMAW Process Using Response Surface Methodology", International journal of Advance Research in computer science and software engineering, Vol. 2, 10 October 2012, pp.349-353.
  8. Rabih Kamal, Henri Chamliaud, Jacques Lanteigne, "Experimental and Finite Element Analysis of a T- Joint welding", Journal of Mechanics Engineering and Automatiaon", Vol. 2, Issue, 25, July 2012, pp.411-421

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-02-28

Issue

Volume 4, Issue 2, January-February-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Abrar Zaidi, Prof. K. R. Madavi, " Improvement of Welding Penetration in MIG Welding, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 2, pp.1198-1203, January-February-2018.