A Technical Review on Analysis of Centrifugal Pump

Authors

  • Parmar Piyushkumar  Mechanical Engineering Department, Vadodara Institute Of Engineering, Vadodara, Gujarat, India
  • Saurabh Valand  Mechanical Engineering Department, Vadodara Institute Of Engineering, Vadodara, Gujarat, India
  • Rushabh Suthar  Mechanical Engineering Department, Vadodara Institute Of Engineering, Vadodara, Gujarat, India

Keywords:

Centrifugal pump, Analysis, CFD, Impeller, Cavitation.

Abstract

Centrifugal pumps are grossly used in chemical industries, oil refineries, sewage disposal systems, mines, food processing industries, power plants for the transportation of fluids. Hence it is required to find the geometric parameters and working conditions to achieve maximum head and efficiency without increasing the manufacturing cost. This paper evince the increasing use of computational fluid dynamics for the analysis of centrifugal pump, as there are various parameters which affect the performance of centrifugal pump it is necessary to analyze all the forces which are act on pump impeller such as drag and friction forces. CFD analysis is very useful to determine the amount of drag force acting on pump impeller when working with different fluids such as Newtonian and non- Newtonian fluids, as the amount of drag force increase than power requirement also increase results in poor performance. Therefore it is necessary to carry out CFD analysis on centrifugal pump maintain its performance in any condition.

References

  1. Weili, Weidongshi, Zhongyongpan, Xiaopingjiang, Lingzhou, (2013), "Research on transient radial force of centrifugal pump", Academic journals ISSN 1992-2248, PP 303-310, vol. 9
  2. Dr.P.Muthu, Alex George, (2016), "CFD Analysis of performance characteristics of centrifugal pump impeller to.minimize cavitation" International Conference on Current Research in Engineering Science and Technology (ICCREST- 2016)
  3. Deeptesh Singh, Dr.AmitSuhane, M.K.Thakur, (2013), "The study of failure analysis of centrifugal pump on the bases of survey" International Journal of Science and Research (IJSR),ISSN 2319-7064
  4. Tilahun Nigussie, Edessa Dribssa, (2015), "Design and CFD Analysis of centrifugal pump", International Journal of Engineering Research and General Science, vol. 3, Issue 3, ISSN 2091-2730.
  5. P.Gurupranesh, R.C.Radha, N.Karthikeyan, "CFD Analysis of Centrifugal Pump Impeller for Performance Enhancement", IOSR Journal of Mechanical and Civil Engineering, e- ISSN 2278-1684, p-ISSN 2320-334X, PP 33-41.
  6. AjithM.S, Dr.JeojuM.Issac, (2015), "Design and Analysis of Centrifugal Pump Impeller Using Ansys Fluent ", International Journal of Science, Engineering and Technology Research, vol. 4, Issue 10.
  7. Raghuvendra S.Muttali, Shweta Agrawal, Harshla Warudkar, (2014), "CFD Simulation of Centrifugal Pump Impeller Using ANSYS CFX", International Journal of Innovative Research in Science Engineering and Technology (IJIRSET), vol. 3, Issue 8, ISSN 2319-8753.
  8. R.M.Pande,S.U.Kandharkar,R.B.Patthe,V.M.Nandedkar,V.B.Tungikar,(2015),"Computational Fluid Dynamics(CFD) of Centrifugal Pump to Study the Cavitation Effect", International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME),vol.4,Issue2,ISSN2319-3182.
  9. T.Sivakumar,P.Aravind,U.AravindhKumar,R.Balamurugan,V.BharathiPriyan(2016)," PERFORMANCE ANALYSIS OF MIXED FLOW PUMP IMPELLER USING CFD", International Journal of Recent Trend In Engineering and Research (IJRTER),vol.2,Issue4,ISSN2455-1457.
  10. SatishM.Rajmane, Dr.S.P.Kallurkar, (2015), "Flow Distribution Network Analysis Discharge Side of Centrifugal Pump", International Journal Innovations in Engineering Research and Technology (IJIERT), vol. 2, Issue 7, ISSN 2394-3696.
  11. C.Buratto, M.Pinelli, P.R.Spina, A.Vaccuri, C.Verga (2015), "CFD Study on Special Duty Centrifugal Pump Operating With Viscous and Non- Newtonian Fluids",
  12. SlawomirDykas, AndrzejWilk (2008), "Determination of the Flow Characteristics of A High Rotational Centrifugal Pump By Means of CFD Methods ",
  13. Y.NagendraBabu, K.Aparana (2016), "Evaluation of Varying Vane Angle of Domestic Centrifugal Pump Using CFD and Structural Analysis ", International Journal Mechanical and Production Engineering, vol. 4, Issue 10, ISSN 2320-2092.
  14. Yu Zhang, Sanbao Hu, Yunqing Zhang, Liping Chen (2014), "Optimization and Analysis of Centrifugal Pump Considering Fluid Structure Interaction", The Scientific World Journal, volume 2014, Article ID 131802.
  15. George Wilson, "The effect of slurries on centrifugal pump performance".

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-04-30

Issue

Volume 4, Issue 5, March-April-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Parmar Piyushkumar, Saurabh Valand, Rushabh Suthar, " A Technical Review on Analysis of Centrifugal Pump, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 5, pp.785-790, March-April-2018.