Comparative Study of Rotational Tool EDM and Stationary Tool EDM - A Review

Authors

  • Malak Soni  Merchant Engineering College, Mechanical Engineering Department, Merchant Education Campus, Mehsana, Visnagar Highway, Basna, Mehsana, Gujarat, India
  • Ronak J Rana  Mechanical Engineering Department, R H Patel Institute of Technology, Kheda, Gujarat, India

Keywords:

Electrical Discharge Machine, Rotary tool EDM, Material Removal Rate, Tool Wear Rate

Abstract

Electrical Discharge Machining (EDM) is a non-conventional machining process in which the machining takes place through spark erosion between tool electrode and workpiece. EDM is used for hard materials which are generally difficult to machine using conventional machining method. Research has been done on EDM to improve its performance measures like Material removal rate (MRR), tool wear rate (TWR), surface roughness (SR) and dimensional accuracy. Various researchers have performed the work on various types of EDMs like Die Sinking EDM, Dry EDM, Powder Mixed EDM (PMEDM) and Wire EDM (WEDM) etc. In this paper objective is to review the research done on EDM assisted with rotary tool. In this paper there is also a depiction about the machining and non-machining parameters used during the particular research work. Present paper reviews the research work done on rotary and orbital EDM to improve its performance measures like MRR, TWR and SR.

References

  1. K. D. Chattopadhyay, P. S. Satsangi, S. Verma & P. C. Sharma, “Analysis of rotary electrical discharge machining characteristics in reversal magnetic field for copper-EN8 steel system”, Int J Adv Manuf Technol (2008), pp.925–937
  2. K. D. Chattopadhyay, P. S. Satsangi, S. Verma & P. C. Sharma, “Development of empirical model for different process parameters during rotary electrical discharge machining of copper–steel (EN-8) system”, Journal of materials processing technology (2 0 0 9) pp.1454–1465
  3. Sushil Kumar Choudhary & Dr. R.S Jadoun, “Current Advanced Research Development of Electric Discharge Machining (EDM): A SReview”, International Journal of Research in Advent Technology, Vol.2, No.3, March 2014,pp273-297
  4. Swaraj Darji & Bindu Pillai, “Estimation of MRR for Micro-EDM Machining Of Hastelloy C 276 using Taguchi Methodology”, Int. J. Mech. Eng. & Rob. Res. 2012 pp.261-267
  5. H. K. Dave, V. J. Mathai, K. P. Desai & H. K. Raval, “Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process”, Int J Adv Manuf Technology, 2013.
  6. Anand Prakash Dwivedi, Sounak Kumar Choudhury, “Increasing the Performance of EDM Process Using Tool Rotation Methodology for Machining AISI D3 Steel”, 7th HPC 2016 – CIRP Conference on High Performance Cutting, Procedia CIRP 46 ( 2016 ) pp.131–134
  7. Anand Prakash Dwivedi & Sounak Kumar Choudhury, “Improvement in the Surface Integrity of AISI D3 Tool Steel using Rotary Tool Electric Discharge Machining Process”, 3rd International Conference on Innovations in Automation and Mechatronics Engineering, ICIAME 2016, Procedia Technology 23 ( 2016 ) pp.280–287
  8. Sanjeev Kumar, Rupinder Singh, T.P. Singh & B.L. Sethi, “Surface modification by electrical discharge machining: A review”, Journal of Materials Processing Technology 209 (2009) pp.3675–3687
  9. Sushil Kumar Choudhary & Dr. R.S Jadoun, “Current Advanced Research Development of Electric Discharge Machining (EDM): A Review”, International Journal of Research in Advent Technology, Vol.2, No.3, March 2014,pp273-297
  10. Gurvir Singh, Manjinder Singh, Narinder Singh Jassal & Baljinder Ram, “To study the effect of electrode Rotational speed and machining parameters on MRR and SR using EDM”, Advances In Materials And Manufacturing Technology 2015, pp.87-90
  11. Reza Teimouri & Hamid Baseri, “Study of Tool Wear and Overcut in EDM Process with Rotary Tool and Magnetic Field”, Advances in Tribology Volume 2012, Article ID 895918 pp.1-8

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-04-30

Issue

Volume 4, Issue 7, March-April-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Malak Soni, Ronak J Rana, " Comparative Study of Rotational Tool EDM and Stationary Tool EDM - A Review, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 7, pp.265-271, March-April-2018.