Tensile Bond Strength of Soft Liner to denture Base Resin Processed by two Commonly used Processing Techniques

Authors(3) :-Peta Harish, T. Pavan Kumar, A. Avinash

This study evaluated the effect of two commonly used methods of processing permanent soft liner on tensile bond strength between denture base and soft liner. Silicone based soft liner was used in this study. Ten heat cure dumbbell shaped specimens along with soft liner were processed together. Another ten heat cure dumbbell shaped specimens were fabricated and later relined with soft liner. All the specimens were subjected to tensile bond strength test. Specimens relined directly with soft liner at the time of processing the denture base resin showed significantly higher bond strength.

Authors and Affiliations

Peta Harish
PG Scholar, Narayana Dental College and Hospital, Nellore, Andhra Pradesh, India
T. Pavan Kumar
Professor, Narayana Dental College and Hospital, Nellore, Andhra Pradesh, India
A. Avinash
PG Scholar, Narayana Dental College and Hospital, Nellore, Andhra Pradesh, India

Soft Liner, Heat Cure Denture Base Resin, Tensile Bond Strength

  1. Garcia LT, Jones JD. Soft Liners. Dent Clin N Am 2004;48;709-720
  2. Gundogdu M, Duymus ZY, Alkurt M. Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base. J Prosthet Dent 2014;1-8
  3. Akin H, Tugut F, Guney U, Kirmali O, Akar T. Tensile bond strength of silicone – based soft denture liner to two chemically different denture base resins after various surface treatments. Laser Med Sci 2013;28:119-123
  4. Madan N, Datta K. Evaluation of tensile bond strength of heat cure and autopolymerizing silicone –based resilient denture liners before and after thermocycling.Indian J Dent Res 2012;23:64-8
  5. Al-Saraj NA, Shehab MM, Al-Irhaym RN. Effect of different curing methods on tensile bond strength soft acrylic liner to heat cured acrylic resin. Al-Rafidain Dent J. 2011;11:292-296

Publication Details

Published in : Volume 6 | Issue 2 | March-April 2019
Date of Publication : 2019-04-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 267-270
Manuscript Number : IJSRST196243
Publisher : Technoscience Academy

Print ISSN : 2395-6011, Online ISSN : 2395-602X

Cite This Article :

Peta Harish, T. Pavan Kumar, A. Avinash, " Tensile Bond Strength of Soft Liner to denture Base Resin Processed by two Commonly used Processing Techniques", International Journal of Scientific Research in Science and Technology(IJSRST), Print ISSN : 2395-6011, Online ISSN : 2395-602X, Volume 6, Issue 2, pp.267-270, March-April-2019. Available at doi : https://doi.org/10.32628/IJSRST196243    
Journal URL : https://ijsrst.com/IJSRST196243
Citation Detection and Elimination     |      | | BibTeX | RIS | CSV

Article Preview