Design and Construction of a Device for Free Form Surfaces 3D Reconstruction Using Microsoft Kinect

Authors

  • Dr. Tahseen F. Abbas  Production and Metallurgy Engineering. Department, University of Technology-Iraq , Baghdad Iraq
  • Dr. Ali Abbar. Khleif  Production and Metallurgy Engineering Department, University of Technology-Iraq, Baghdad Iraq
  • Dr.Hameed S. Ismael  Civil Engineering Department, University of Technology-Iraq, Baghdad Iraq

DOI:

https://doi.org//10.32628/IJSRST19629

Keywords:

Range Camera, IR Sensor, Stepper Motor, Imaging, Arduino and Matlab

Abstract

There is an increasing need for geometric 3D reconstruction models in the Reverse engineering which is ones of computer Vision applications, reconstruction from a sequence of 2D images is much cheaper than 3D scanners and coordinate measurement machine and also been able to take advantage of the developments in digital cameras and the increasing resolution and quality of images. This work aims to develop a concept of 3D free form surface reconstruction rig and generate the dimension of the surface depending on proposed image processing technique. Through the results obtained is observed that. The overall of calibration accuracy the Root mean square (RMS) value of the point was produced the residuals value in the image space was (0.2830 mm) in the IR images.

References

  1. A. Manor and Affiliated “Reverse Engineering of 3D Models Based on Image Processing and 3D Scanning Techniques” 2001
  2. R. j. Hocken & Paulo H. Pereira “Coordinate measurement Machines Systems” Second Edition by CRC Press Reference 2011.
  3. D. Huang, G. Lee and D. Yang “3D LASER SCANNER” Final Report for ECE 445, Senior Design, 2013.
  4. M. Kasser and Y. Egels “Digital Photogrametry” taylor & Francis ,2002
  5. F. S. A. Al-hasoon “Accuracy Assessment Of Data Processing In Analytical Digital Photogrammetry Using Relative & Absolute Orientation Mathmatical Model” ,2015
  6. C. Shu and G. Roth “ree-Form Surface Reconstruction from Multiple Images” ,2003
  7. T. F. Abbas and A. A. Ebraheem “Reconstruction of free form Surfaces in Reverse Engineering Technology Applications”2014

International Journal of Scientific Research in Science and Technology

Downloads

Published

2019-04-30

Issue

Volume 6, Issue 2, March-April-2019

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Dr. Tahseen F. Abbas, Dr. Ali Abbar. Khleif, Dr.Hameed S. Ismael, " Design and Construction of a Device for Free Form Surfaces 3D Reconstruction Using Microsoft Kinect, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 6, Issue 2, pp.82-86, March-April-2019. Available at doi : https://doi.org/10.32628/IJSRST19629