Thermal Stability and Glass Forming Ability of Li+ Ion Conducting Glasses

Authors

  • D. T. Dongare  Department of Physics S.S.S. K.R. Innani Mahavidyalaya Karanja (lad), Washim, Maharastra, India

Keywords:

Melt quenching, XRD,SEM, DTA and GFA

Abstract

The ionic conducting glasses of modifier ratio h =1.5 and former ratio y = 0.66 ≤ y ≤ 1 have been prepared with various composition by using melt quenching technique. The nature of glass samples were confirmed by XRD and SEM. The reduced glass transition temperature (Trg), width of the super cooled liquid (ΔTx), reduced crystallization temperature (γ) and Hurby parameter (KH) was determined from TG-DTA graph. Differential Thermal Analysis showed that glass transition temperature changes due to change of composition. The thermal analysis revealed that mass loss of sample decreases with increase in mole percent of Al2O3 and the GFA parameters ΔTx and γ follow the same trends with GS parameter KH. The glass sample content of 5 mole percent of Al2O3 was higher thermal stability against crystallization.

References

  1. Chawdari B.V.R. & Zhou Rong, (1995); Study of Fluorinated Lithium Borate Glasses, Solid State Ionics,78,133-142.
  2. Mozzi R.L & Warren B.E. (1970), Structure Of Vitreous Boron Oxide, J. Applied Crystallography,3,251.
  3. Irion M. and Couzi M, Lavasseuer A.,Brethous J.C.,Reau J.M.,Hagenmuller P., An Infrared and Ramman Study of New Ionic Conductor Lithium Glasses, J.Solid State Chem.31,285.
  4. Knoche R., Dingwell D.B.,  Seifert F.A., Webb S.L. (1994),Non linear properties of super cooled liquid in the system Na2O-SiO2, Chem. Geol., 116, 1-16.
  5. Neuville D.R. (2006) ; Viscosity, Structure and mixing in (Ca, Na) silicate melt, Chem. Geol. 229, 28-41.
  6. Tangeman J.A, Lange R.A. (1998); Effect of Al+3,Fe3+,and Ti4+ on configurationally heat capacities of sodium silicate liquids, Phys. Chem. Miner. 26, 83-99.
  7. McMillan P.F., Wilding M.C, (2009); High pressure effects on liquid viscosity and glass transition behaviour, polymorphic phase transitions and structural properties of glasses and liquids J. Non-Cryst. Solids 355,722-732.
  8. Lu Z., Tan P., Li Y.(2000); The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses,42,667-673.
  9. Suo Z.Y.,Qiu K.Q, Li Q.F.,Ren Y.L., Hu Z.Q. (2010); A new Parameter to evaluate the glass forming ability of bulk metallic glasses, 528(1),429-433.
  10. Shapaan M., Labar J., Lendvai J. & Varga L.K.,(2004); Glass forming ability and thermal stability of Fe62Nb8-xZrXb3O and Fe72Zr8B2O amorphous alloys. Central European Journal of Phys. 2(1), 104.S
  11. Shapaan M., Bardos A.,Labar J., Lendvai J. &  Varga L.K.,(2004); Thermal stability and glass forming ability of cast iron based CiPxB4.35 bulk amorphous alloys,Phys.Stat.Sol(a) 201,No.3,476-482.
  12. Lu Z.P. & Lu C.T.(2002); A new glass forming  ability criterion for bulk metallic glasses Acta Mater, 50, 3501-3512.
  13. Uhlmann D.R.(1980); Nucleation, Crystallization and glass formation, J. Non Crystalline Solid, Vol.38-39,693-698.
  14. Donald L.W. and Devies H.A.(1979); Prediction of glass forming ability for metallic systems, J.Non Crystalline Solids,30,77-85.
  15. Hruby A.(1972); Evaluation of glass forming tendency by means of DTA Czech J. Phys., B22, 1187.
  16. Dongare D.T. and Lad A.B(2015); Structural investigation of Li2O -B2O3-Al2O3 glasses by XRD,DTA and density measurement,  International Vol5(1), International Journal Of Physics And Researches,Vol.5, 1-6.
  17. Dongare D.T. and Lad A.B(2017):composition effect of Al2O3 on FTIR and DTA in Lithium borate glasses, International Journal of applied and natural sciences, Vol. 6(5), 139-144.
  18. Dongare D.T and Tayade S.E(2017); Evaluation of glass forming  tendency of lithium borate glass by DTA, International Journal of Advance Researches in Science and Engineering, Vol,6 (8),3032-3038.
  19. Pal M.(2005); "Borate Based Spintronic Materials in Bulk Form above Room Temperature," Journal of Surface Science and Technology, Vol. 21, No. 1-2, 2005, pp. 91-96.
  20. Soliman A.A.,(1998); XRD, DTA And Density Studies of Lithium Borate Glasses Containing Copper Egypt J. Solids, 21, (1998), 2.

Downloads

Published

2018-01-30

Issue

Section

Research Articles

How to Cite

[1]
D. T. Dongare, " Thermal Stability and Glass Forming Ability of Li+ Ion Conducting Glasses, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 1, pp.61-65 , January-February-2018.