Design and Fabrication of Hybrid Grass Cutter

Authors(7) :-Danish Khan, Gaurav Dhotre, Kaustubh Ramteke, Mohit Borkar, Salman Khan, Aman Talewar, Prof. Pramod Gadge

The present technology which is commonly used for trimming the grass is by using the manually handle device. In this paper we have proposed, specially designed and fabricated a semi-automated hybrid machine using a wireless remote controller in which various functions such as trimming the grass, floor moping, fan operation, mobile charging, emergency light, pesticide/insecticide sprayer and bird repellent siren, etc. are incorporated in a single hybrid machine. The device consists of linear blade which is operated with the help of motor. The power supply to the motor is given by using a battery. The battery is charged by using a solar panel, and alternatively it can be powered by using an AC source. The system uses a 12 volt battery to power the vehicle movement as well as the grass cutting motor. The vehicle is fabricated using PVC pipes so as to make the vehicle light in weight, robust and non-corrosive. It has an IR sensor for obstacle detection in case if an obstacle is detection the IR sensor will monitor it and the switch arrangement will stops the grass cutting motor to avoid any accident.

Authors and Affiliations

Danish Khan
B.E. Student, Department of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India
Gaurav Dhotre
B.E. Student, Department of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India
Kaustubh Ramteke
B.E. Student, Department of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India
Mohit Borkar
B.E. Student, Department of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India
Salman Khan
B.E. Student, Department of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India
Aman Talewar
B.E. Student, Department of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India
Prof. Pramod Gadge
Associate professor, Dept. of Electrical Engineering, A. C. E. T. Nagpur, Maharashtra, India

Solar Panel, Battery, DC Motor, Obstacle Sensor, Blade.

  1. R.S. Khurmi and Gupta, "Machine Design" 14th?? edition, S. Chand
  2. V.B. Bhandari, "Machine Design" 3rd edition, Tata McGraw Hill
  3. U. C. Jindal, "Machine Design".2 reprint edition, Pearson Education India
  4. K.Sawney, "Electrical and Electronic Measuring Instruments", Dhanpat Rai and
  5. G.D. Rai ,Non-Conventional Energy Source
  6. Godfrey Boyle ,Renewable Energy-Power For A Sustainable future
  7. Ms. Yogita D. Ambekar, Mr. Abhishek U. Ghate . Solar based grass cutter, International journal of Electrical and electronics engineering. Vol 9 2017.
  8. Ms.Bhagyashri R. patil, Mr.Sagar S patil,. Solar based Grass Cutter, International journal of Electrical and electronics engineering. Vol 9 2017.
  9. E. Nareshbossbabu, G Rahul,. Grass Cutting Machine by Solar energy power, International journal and magazine of Engineering and Technology, Management and Research. Vol-3?? 2016.
  10. P. Amrutesh, B. Sagar, B. Venu,. Solar Grass Cutter with linear blades by using scottch yoke mechanism. International journal of Engineering Research and application. Vol-4?? 2014.
  11. P. M Madhav, H.B. Bhaskar, novateur publications international journal of innovations in engineering research and technology ijiert] ISSN: 2394-3696 volume 2, issue 2 Feb. -2015.
  12. S.O. Nkakini, B.E. Yabefa, European International Journal of Science and Technology, ISSN: 2304-9693, Vol. 3, No. 4 May-2014.
  13. Vishal Danve, Anindu Bose and Varun Dhawan" Solar powered gardener" International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com Special Issue 39 (KCCEMSR) (March 2016),PP. 39-43
  14. Praful P. Ulhe, Manish D. Inwate "Modification of solargrass cutting machine",IJIRST ???International Journal for Innovative Research in Science & Technology| Volume 2 | Issue 11 | April 2016 ISSN (online): 2349-6010 science and engineering ,november 2,2011.

Publication Details

Published in : Volume 4 | Issue 3 | January-February 2018
Date of Publication : 2018-01-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 01-06
Manuscript Number : NCAEAS4301
Publisher : Technoscience Academy

Print ISSN : 2395-6011, Online ISSN : 2395-602X

Cite This Article :

Danish Khan, Gaurav Dhotre, Kaustubh Ramteke, Mohit Borkar, Salman Khan, Aman Talewar, Prof. Pramod Gadge, " Design and Fabrication of Hybrid Grass Cutter ", International Journal of Scientific Research in Science and Technology(IJSRST), Print ISSN : 2395-6011, Online ISSN : 2395-602X, Volume 4, Issue 3, pp.01-06, January-February-2018.
Journal URL : http://ijsrst.com/NCAEAS4301

Article Preview