A Review on Influence of Manufacturing Waste (Carbon Black) on Properties of Concrete

Authors(5) :-Md Amir Raza, Afroz Vakil, Naziya Anjum, Tanveerul Gani, Prof Aquib Ansari

From the beginning, concrete has been an essential building material in the construction industry. This concrete contains pores and micro-cracks which lead to less resistance of atmospheric attacks and acid intrusions. This can be resolved by making concrete denser by adding filler which will decrease permeability and increase durability and strength of concrete. So, an experimental attempt is made to fill these pores in concrete by adding Carbon Black Powder, obtained from waste of rubber industry which acts as filler in concrete. This paper presents a review of all such authors who had used. To suggest the optimum percentage of carbon black to be added in concretes with carbon black of different percentage were cast. A comparison of strength is made between conventional and non-conventional concrete blocks. It is observed that the strength gets dramatically increased with the addition of filler in the concrete and hence shows good performance in durability with addition of Carbon Black in the concrete. This paper presents a review of all such authors who had used Carbon Black in various forms for to determine its optimum doses and its various properties.

Authors and Affiliations

Md Amir Raza
UG Student, Civil Engg. Department, ACET, Nagpur, Maharashtra, India
Afroz Vakil
UG Student, Civil Engg. Department, ACET, Nagpur, Maharashtra, India
Naziya Anjum
UG Student, Civil Engg. Department, ACET, Nagpur, Maharashtra, India
Tanveerul Gani
UG Student, Civil Engg. Department, ACET, Nagpur, Maharashtra, India
Prof Aquib Ansari
Assistant Professor, Civil Engg. Department, ACET, Nagpur, Maharashtra, India

Carbon black as a filler, Compressive strength

  1. B. Padma Priya, Mrs. k. Pandeeshwari .M.E (2016) 'Experimental Investigation on the Properties of Concrete with Carbon Black and PET', International Journal of Advanced Research, 4(4),
  2. Dr. G. Chitra, P. Vetri Selvi, Dr. D. Vijaylakshmi (2014) 'Carbon Black as an Additive in Conventional Concrete', International Journal of Emerging Technology and Advanced Engineering, 4(3)
  3. Gaurav Nagavkar (2017) 'Effect on properties of concrete with partial replacement of additives cement', International Journal of Engineering Sciences and Research Technology, 6(2),
  4. Perviz Ahmedzade &Tacetinn Geckil? (2017) "The Effect Of Carbon Black On Mechanical And Electrical Properties Of Asphalt Mixture" Indian Journal On Engineering And Material Sciences, 4
  5. M.H Kharitas. Yousef And M. Alnassar (2008) "The Effect Of Carbon Powder Addition On The? Properties? Of Hematite Radiation Shielding concrete"
  6. A. Goldman And A.Bentur,1993,Vol 23 "The Influence Of Micro fillers On Enhancement Of Concrete Strength", Cement And Concrete Research 23
  7. Sami Masadeh (2015), "The Effect Of Added Carbon Black To Concrete Mix On Corrosion Of Steel In Concrete", Journal Of Minerals And Materials Characterization And Engineering, 2015

Publication Details

Published in : Volume 4 | Issue 3 | January-February 2018
Date of Publication : 2018-01-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 129-131
Manuscript Number : NCAEAS4326
Publisher : Technoscience Academy

Print ISSN : 2395-6011, Online ISSN : 2395-602X

Cite This Article :

Md Amir Raza, Afroz Vakil, Naziya Anjum, Tanveerul Gani, Prof Aquib Ansari, " A Review on Influence of Manufacturing Waste (Carbon Black) on Properties of Concrete", International Journal of Scientific Research in Science and Technology(IJSRST), Print ISSN : 2395-6011, Online ISSN : 2395-602X, Volume 4, Issue 3, pp.129-131, January-February-2018.
Journal URL : http://ijsrst.com/NCAEAS4326

Article Preview