A Review on Zigbee Based Parameters Monitoring and Controlling System for Induction Motor

Authors(4) :-Ankita D. Thakare, Punam S. Raut, Shital G. Lahabar, Prof. A. B. Nagdewate

Induction machines are very useful in many applications, such as suburban, commercial, engineering and utility applications due to its simple construction and low maintenance. They convert electrical energy into mechanical energy. Induction motor also used in household applications, such as pump, fan etc. It may be connected to some other form of mechanical equipment such as a winding machine, a conveyor belt or a mixer. Induction motors have existed before many years ago but were always limited in their application because it was difficult to control the speed of the motor. Monitoring of an Induction motor is a fast upcoming technology for the detection of initial faults. It avoids unexpected failure of an industrial process. Monitoring techniques are of two types as the conventional and the digital techniques. This paper proposes a wireless control and monitoring system for an induction motor based on ZigBee communication protocol. This system is safe and economic for data communication in industrial as well as in commercial fields. A module of transducers and sensors monitors the parameters of induction motor such as current, voltage, speed and temperature and transmits this data through wireless ZigBee Protocol. Microcontroller based system is used for collecting and storing the data. According to this data it will generate control signal to stop or start the induction motor through computer interface developed with Zigbee.

Authors and Affiliations

Ankita D. Thakare
UG Scholar, Electrical Engineering, DES’s COET, Dhamangaon (Rly.), Maharashtra, India
Punam S. Raut
UG Scholar, Electrical Engineering, DES’s COET, Dhamangaon (Rly.), Maharashtra, India
Shital G. Lahabar
UG Scholar, Electrical Engineering, DES’s COET, Dhamangaon (Rly.), Maharashtra, India
Prof. A. B. Nagdewate
UG Scholar, Electrical Engineering, DES’s COET, Dhamangaon (Rly.), Maharashtra, India

Induction Motor, Monitoring System, Wireless control and ZigBee Module.

  1. Baran L., "A PLC based monitoring and control of power factor of a three phase induction motors," MSc Thesis, Gazi University, Institute of Science and Technology, Ankara, 2009.
  2. Bay??nd??r, R., Demirbas, s., Irmak, E., Bekiroglu, E., "Design and implementation of microcontroller based starting and protection relay for induction motors," Journal of Polytechnic, 2007, pp.1-2.
  3. Bektas, A., Colak, I., Bay??nd??r, R., "A PLC based application for induction motor protection," Journal of Polytechnic, vol.10, no. 2, 2007, pp.17.
  4. Chengbo YU, Yanfei LIU, Cheng WANG, "Research on ZigBee Wireless Sensors Network Based on ModBus Protocol,"Journal of Wireless Sensor Network, 2009, pp.1-60.
  5. Daniel Alexandru Visan, Ioan Lita, Mariana Jurian and Ion Bogdan Cioc, "Wireless Measurement System Based on ZigBee Transmission Technology," IEEE Transactions on 33rd Int. Spring Seminar on Electronics Technology, 2010.
  6. Ramazan Bayindir, Ibrahim Sefa, Ilhami Colak, and Askin Bektas "Fault Detection and Protection of Induction Motors Using Sensors," IEEE transactions on energy conversion, vol. 23, no. 3, september 2008.
  7. R. R. Patil, T. N. Date, B. E. Kushare., "ZigBee Based Parameters Monitoring System for Induction motor," Department of Electrical Engineering, K. K. Wagh Institute of Engineering Education and Research, Amrut-Dham, Panchavati, Nashik-422003, India.
  8. Siddique, A., Yadava, G. S., Singh, B. A., "Review of stator fault monitoring techniques of induction motors," IEEE Transactions on Energy Conversion, vol.20, no.1, pp.106-114.
  9. Vongsagon Boonsawat, Jurarat Ekchamanonta, Kulwadee Bumrungkhet, and Somsak Kittipiyakul, "XBee Wireless Sensor Networks for Temperature Monitoring," Industrial Applications Conference, Sept 2007, pp.661-667.
  10. Zhang P., Du Y., Habetler TG, Lu B., "A Survey of???????? Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors," IEEE Transactions On Industry Applications, vol.47, no.1, 2011, pp.34-45.
  11. Zhu XQ., Wang JM., "The research and implementation of ZigBee protocol network," Journal of Electronic Technology, 2006, pp.129-132.

Publication Details

Published in : Volume 4 | Issue 3 | January-February 2018
Date of Publication : 2018-01-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 472-476
Manuscript Number : NCAEAS4395
Publisher : Technoscience Academy

Print ISSN : 2395-6011, Online ISSN : 2395-602X

Cite This Article :

Ankita D. Thakare, Punam S. Raut, Shital G. Lahabar, Prof. A. B. Nagdewate, " A Review on Zigbee Based Parameters Monitoring and Controlling System for Induction Motor, International Journal of Scientific Research in Science and Technology(IJSRST), Print ISSN : 2395-6011, Online ISSN : 2395-602X, Volume 4, Issue 3, pp.472-476, January-February-2018. Available at doi : 10.32628/NCAEAS4395
Journal URL : http://ijsrst.com/NCAEAS4395

Article Preview

Contact Us