State of the Art Review on Design of Steel Plate Shear Wall

Authors

  • Durba Lego  Research Scholar, Department of Civil Engineering, Himalayan University, Itanagar, Arunachal Pradesh, India
  • Talkeshwar Ray  Assistant Professor, Department of Civil Engineering, Himalayan University, Itanagar, Arunachal Pradesh, India

DOI:

https://doi.org/10.32628/IJSRST229480

Keywords:

Shear wall, stability

Abstract

Steel plate shear walls are rapidly becoming an appealing alternative in high seismic areas. The current research reviews the existing work on design and development of steel plate shear wall. The existing studies encompasses research on optimization of different design parameters of SPSW, materials of SPSW and various design configurations. The stability of these structures as lateral load resisting member is assessed using experimental and numerical techniques and presented in this review.

References

  1. AISC (2004), “2005 Seismic Provisions for Structural Steel Buildings”, American Institute of Steel Construction, Chicago, IL.
  2. Astaneh-Asl, A. (2001), “Seismic Behavior and Design of Steel Shear Walls”, Steel Tip 37, Structural Steel Educational Council, Moraga, CA.
  3. P.P Chandurkar, DR. P.S. Pajgade, "Seismic analysis of RCC building with and without shear wall" IJMER, Vol.3, Issue 3, may- june 2013,pp- 1805 -1810,2013
  4. Varsha. R. Harne "Comparative study of strength of RC Shear wall at different location on multistoried Residential building", International Journal of civil Engineering Research. ISSN 2278-3652 Volume5,Number 4(2014)pp 391-400
  5. Anshuman.S, Dipendu Bhunia,Bhavin Ramjiyani,"Solution of shear wall location in multistorey building",International Journal of Civil and Structural Engineering , Volume 2, No 2,2011.
  6. Dr. B.Kameswari , Dr. G Elangovan ,P. Sivabala, G. Vaisakh, "Dynamic Response of High rise Structures under the Influence of discrete staggered shear wall", IJEST,2011
  7. Qiuhong ZHAO, Abolhassan Astaneh -ASL ," Cyclic Behaviour of traditional and innovative composite shear walls" 13th World Conference on Earthquake Engineering.
  8. Ashish B. and Raut Harshlata R, " Effect of steel plate shear wall on behavior of structure" International Journal of civil Engineering Research. ISSN 2278-3652 Volume5, Number 3(2014)pp 295-300.
  9. Shahabodin. Zaregairizi, "Comparative investigation on using shear wall and infill to improve seismic performance of existing buildings", 14th World Conference on Earthquake Engineering.
  10. Men Jinjie,Shi Qingxuan,He Zhijian,"Optimal Design of Tall Residential Building with Shear wall and with Rectangular layout" International Journal of High Rise Buildings Volume 3 Number4.
  11. Chun Ni Erol Karacabeyli, Performance of Shear Walls with Diagonal or Transverse Lumber Sheathing, Journal of Structural Engineering 14. Mark Fintel, Performance.
  12. Tsonos AG, Tegos IA, Penelis GGr. “Seismic resistance of type 2 exterior beam-column joints reinforced with inclined bars, ACI structuraljournal, 89,. 3-12,1992.
  13. A. Ravi Kumar K. Sundar Kumar "Analysis and Design of Shear Wall for an Earthquake Resistant Building using ETABS"International Journal for Innovative Research in Science & Technology, Volume 4 , Issue 5, October 2017
  14. Natalino Gatteso, Allen Dudine, Rita Franceschinis, “Experimental investigation on the seismic behaviour of timber shear walls with practicle boards”. World conference on Timber Engineering, Auckland (2012).
  15. Wen - I Liao , Jianxia Zhong ,C.C.Lin,Y.L.Mo,Chin- Hsiung " Experimental studies of high seismic performance shear walls" 13th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004 Paper No. 501
  16. A.B. Karnale and Dr. D. N. Shinde, Comparative Seismic Analysis of High Rise and Low Rise RCC Building with Shear Wall, International Journal of Innovative Research in Science, Engineering and Technology, September 2015.
  17. Martínez-Martínez J, Xu L. Simplified nonlinear finite element analysis of buildings with CFS shear wall panels. J Constr Steel Res 2011;67(4):565–75.
  18. Liu P., Peterman K.D., Yu C. and Schafer B.W., “Characterization of cold-formed steel shear wall behavior under cyclic loading for CFS-NEES building”, Proceedings of the 21st International Specialty Conference on Cold-Formed Steel Structures, October 24-25, 2012, St. Louis, Missouri, United States
  19. https://opensees.berkeley.edu/wiki/index.php/Pinching4_Material.
  20. Lowes LN, Altoontash A. Modeling reinforced-concrete beam-column joints subjected to cyclic loading. J Struct Eng 2003;129(12):1686–97.
  21. Shamim I, Rogers CA. Steel sheathed/CFS framed shear walls under dynamic loading: Numerical modelling and calibration. Thin-Walled Structures 2013;71: 57–71.
  22. Buonopane SG, Bian G, Tun TH, Schafer BW. Computationally efficient fastener based models of cold-formed steel shear walls with wood sheathing. J Constr Steel Res 2015;110: 137–48.
  23. Padilla-Llano DA. A framework for cyclic simulation of thin-walled cold-formed steel members in structural systems. Blacksburg, United States: Virginia Polytechnic Institute and State University; 2015. Ph.D. thesis.
  24. Ngo H.H., “Numerical and experimental studies of wood sheathed cold-formed steel framed shear walls”, MSc. Thesis, Johns Hopkins University, Baltimore, MD, United States, (2014).
  25. Derveni F, Gerasimidis S, Schafer BW, Peterman KD. High fidelity finite element modeling of wood-sheathed cold-formed steel shear walls. J Struct Eng 2021;147: 04020316.
  26. Derveni F, Gerasimidis S, Peterman KD. Behavior of cold-formed steel shear walls sheathed with high-capacity sheathing. Eng Struct 2020;225: 111280. https://doi. org/10.1016/j.engstruct.2020.111280.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2022-08-30

Issue

Volume 9, Issue 4, July-August-2022

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Durba Lego, Talkeshwar Ray "State of the Art Review on Design of Steel Plate Shear Wall " International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 9, Issue 4, pp.605-610, July-August-2022. Available at doi : https://doi.org/10.32628/IJSRST229480