Flow visualization of air jet impingement on convex heated surface - A Review

Authors

  • Chitranjan Agrawal  Department of Mechanical Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur, Rajasthan, India

Keywords:

Air Jet, Convex Surface, Flow Visualization, Impingement, Vortex.

Abstract

Flow dynamics of round and slot air jet impinging on convex surface is reviewed by considering free jet flow visualization images. Phenomena of air entrainment, large vortex structure generation, vortex merging, pairing, break up in the flow are responsible for different heat transfer behavior from the hot surface. In this paper an attempt is made to review flow dynamics and flow behavior by round air jet over convex heated surface along with discussion for jet structure under free condition.

References

  1. Gardon, R. and Akfirat, J. C. 1965. The role of turbulence in determining the heat-transfer characteristics of impinging jets. Int.J, Heat Mass Transfer, Vol 8, 1261-1272
  2. J. W. Baughn, A. E. Hechanova,and Xiaojun Yan, 1991, An Experimental Study of Entrainment Effects on the Heat Transfer From a Flat Surface to a Heated Circular Impinging Jet, ASME Journal of Heat Transfer, Vol 113, 1023-1025.
  3. A. K. Mohanty and A. A. Tawfeek, 1993 Heat transfer due to a round jet impinging normal to a flat surface In,. J. Heat Mass transfer, Vol 36, 1639-1647.
  4. Lianmin huang and mohamed s. el-genk, 1994, heat transfer of an impinging jet on a flat surface, int. j heat mass transfer, Vol 37, 1915-1923.
  5. A. Tawfek, 1996, Heat transfer and pressure distributions of an impinging jet on a flat surface Heat and Mass Transfer, Vol 32, 49-54.
  6. Sagot a,, G. Antonini b, A. Christgena, F. Burona. 2008, Jet impingement heat transfer on a flat plate at a constant wall temperature International Journal of Thermal Sciences, Vol 47,? 1610?1619
  7. K Kataoka. 1985, optimal nozzle to plate spacing for convective heat transfer in non isothermal variable density impinging jet, Drying tech, Vol 3, 235-254
  8. W.M. Chakroun, A.A. Abdel-Rahman, S.F. Al-Fahed, 1998, Heat transfer augmentation for air jet impinged on a rough surface Applied Thermal Engineering, Vol 18, 1225-1241
  9. Abdlmonem H. Beitelmal and Michel A, Saad, Chandrakant D. Patel, 2000, Effects Of Surface Roughness On The Average Heat Transfer Of An Impinging Air Jet, Int. Comm. Heat Mass Transfer, Vol 27, 1-12
  10. Luis A. Brignoni, Suresh V. Garimella, 2000, Effects of nozzle-inlet chamfering on pressure drop and heat transfer in confined air jet impingement International Journal of Heat and Mass Transfer, Vol 43, 1133-1139
  11. M.F. Koseoglu a, S. Baskaya, 2009, Experimental and numerical investigation of natural convection effects on confined impinging jet heat transfer International Journal of Heat and Mass Transfer, Vol 52, 1326?1336
  12. H. STAPOUNTZIS, 1993, Oblique Impingement of a Circular Jet in a Cross Flow Applied Scientific Research, Vol 51, 231-235
  13. Goldstein, R. J. and Franchett, M. E. 1988. Heat transfer from a flat surface to an oblique impinging jet. ASME J. Heat Transfer, Vol 110, 87-93
  14. Xiaojun Yan anti Nader Saniei, 1997, Heat transfer from an obliquely impinging circular air jet to a flat plate, Int. J. Heat and Fluid Flow, Vol 18, 591-599
  15. Martin, H. 1977. Heat and mass transfer between impinging gas jets and solid surfaces. Advances in Heat Transfer, Vol 13, 1-60
  16. Jambunathan K., Lai E., Moss M.A., Button B.L. 1992, A review of heat transfer data for singular jet impingement, Int. J. Heat Fluid Flow, Vol 13, 106?115.
  17. Viskanta R. 1993, Heat transfer to impinging iso-thermal gas and flame jets, Exp. Thermal Fluid Science, Vol 6, 111?134.
  18. A.A. Tawfek, 1999, Heat transfer due to a round jet impinging normal to a circular cylinder, Heat and Mass Transfer, Vol 35, 327-333
  19. A.A. Tawfek, 2002, Heat transfer studies of the oblique impingement of round jet upon a curved surface. Heat and Mass Transfer, Vol 38, 467-475
  20. D. H. Lee, Y. S. Chung, D. S. Kim, 1997, Turbulent flow and heat transfer measurements on a curved surface with a fully developed round impinging jet int. jr heat and fluid flow, Vol 18, 160-169,
  21. D. H. Lee, Y. S. Chung, M. G. Kim, 1999, Turbulent heat transfer from a convex hemispherical surface to a round impinging jet, int. Jr. of heat and mass transfer, Vol 42, 1147-1156
  22. C. Cornaro, A.S. Fleischer, R.J. Goldstein, 1999, Flow visualization of a round jet impinging on cylindrical surfaces, Experimental Thermal and Fluid Science, Vol 20, 66-78
  23. Cristina Cornaro, Amy S. Fleischer, Michael Rounds, Richard J.Goldstein, 2001, Jet impingement cooling of a convex semi-cylindrical surface, Int. J. Therm. Sci, Vol 40, 890?898
  24. A S fleischer, k kramer, R J Goldstein, 2001, Dynamics of vortex structure of a jet impinging on a convex surface, Exp. Thermal and fluid science, Vol 24, 169-175
  25. C.O. popiel, O. Trass, 1991, Visualization of a free and impinging round jet, , Exp. Thermal fluid science, Vol 4, 253-264.
  26. Hrycak P., 1980 Heat transfer from a row of impinging jets to concave cylindrical surfaces, Int. Jr. Heat mass transfer, Vol. 24, 407-419
  27. Hrycak P. 1981, Heat transfer from a row of jets impinging on concave semi-cylindrical surfaces, International .J .Heat Mass Transfer, Vol 28, 175?181
  28. H. Schuh And B. Persson, 1964, Heat Transfer On Circular Cylinders Exposed To Free-Jet Flow, Int. Jr. Heat Mass Transfer, Vol 7, 1257-1271.
  29. C. Gau, C M Chung, 1991, Surface curvature effect on slot air jet impingement cooling flow and heat transfer process, Journal of heat transfer Trans of ASME, Vol 113, 858- 864
  30. C.S. Mc Daniel, B.W. Webb, 2000, Slot jet impingement heat transfer from circular cylinders, , intr. Jr. of heat and mass tranfer, Vol 43, 1975-1985
  31. E.M. Sparrow A. Alhomoud. 1984, Impingement heat trans-fer at a circular cylinder due to an offset or non-offset slot jet, Int. J. Heat Mass Transfer, Vol 27, 2297- 2306.
  32. S.H. Kang, R. Greif, 1992, Flow and heat transfer to a circular cylinder with a? impinging air jet, Int. Jr. of heat and mass transfer, Vol 35, 2173- 2183
  33. Elmar Achenbach, 1975, Total and local Heat? transfer from a smooth circular cylinder in cross flow at high Re, International journal of heat mass transfer, Vol 18, 1387-96
  34. G W lowery, R I Vachon, 1975, The effect of turbulence on heat transfer from heated cylinder, int. Journal of heat mass transfer, Vol 18, 1229- 1242
  35. Giralt, F., Chia, C., and Trass, O. 1977. Characterization of the impingement region in and axisymmetric turbulent jet. Ind. Eng. Chemistry Fundamentals, Vol 16, 21-28.
  36. Fondse, H., Leijden, S., and Ooms, G., 1983, On the Influence of the Exit Conditions on the Entrainment Rate in the Development Region of a Free, Round, Turbulent Jet, Appl. Sci. Res., Vol 40, 355-375.
  37. Kestin, J., and Wood, R. T., 1970, On the Stability of Two-Dimensional Stagnation Flow, Journal of Fluid Mechanics, Vol 44, 461-479.
  38. Sparrow EM; Altemani CAC; Chaboki A, 1984, Jet impingement heat transfer for a circular jet impinging in cross flow on a cylinder, Trans ASME JHT, Vol 106, 570-577

International Journal of Scientific Research in Science and Technology

Downloads

Published

2017-12-31

Issue

Volume 3, Issue 8, November-December-2017

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Chitranjan Agrawal "Flow visualization of air jet impingement on convex heated surface - A Review " International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 3, Issue 8, pp.735-741, November-December-2017.