To Improve the Overal Equipment Effectiveness of Wheel Surface Machining Plant of Railway Using Total Productive Maintenance

Authors

  • Munyaradzi Kapuyanyika  
  • Kinjal Suthar  

Keywords:

5S, Total Productive Maintenance (TPM), Overall Equipment Effectiveness (OEE), six big losses, focused improvement

Abstract

The core of this report is doing a study on the wheel workshop at Railway and coming up with suggestions to implement total productive maintenance in the workshop. Small losses in time or small deviations from designed capability are taken as normal machine behaviour. Total Productive Maintenance (TPM) is a plan which concentrates on total involvement of everyone from top management to all employees to implement a comprehensive maintenance program for all equipment throughout its life. This plan results in maximum effectiveness of equipment, tidier, neat and clean work place and morally boosted employees.

References

  1. Jamal Ahmed Hama Kareem, Noraini Abu Talib "Role Of Ethical Factors In 5s And Tpm Implementation:Study Of Kurdish Cement Industry, IRAQ"International Journal of Mechanical And Production Engineering, ISSN: 2320-2092
  2. ZahidHabibKang Wang "Implementation of Total Productive Maintenance on Haldex Assembly Line"
  3. A.K.M. Masud, Abdullah-Al-Khaled,SeratunJannat, A.K.M. SajedulArefin Khan &KingshukJubaerIslam"Total Maintenance In Rmg Sector A Case: Burlingtons Limited, Bangladesh Productive"
  4. Assoc. Prof.Dr.Norzimabinti Zulkifli1a, NurHanani Mat Zali2b, and Assoc. Prof.Dr.FaiezaAbd. Aziz2a "Implementing Total Productive Maintenance at an Electronic Company"? th Int'l Conference on Advances in Engineering Sciences & Applied Mathematics (ICAESAM'2015) Dec. 8-9, 2015 Kuala Lumpur (Malaysia)
  5. Mustafa Mohamed Graisa "An Investigation into the Need and Implementation of Total Productive Maintenance (TPM) in Libyan Cement Industry"
  6. Islam H. Afefy "Implementation of Total Productive Maintenance and Overall Equipment Effectiveness Evaluation"International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:13 No:01
  7. Alorom, M. (2015) The Implementation of Total Productive Maintenance in The LibyanHeavy Industry. Unpublished PhD Thesis. Coventry: Coventry University
  8. Jonas BergsmanAndersH?ll "Improving maintenance efficiency at AstraZeneca through increased use of TPM"LIU-IEI-TEK-A--10/00781?SE
  9. Dashrath kumar1, Er. Dinesh Kumar2, Er. RohitRawat "Methodology used for improving overall equipment effectiveness by Implementing Total Productive Maintenance in plastic pipemanufacturingindustries"InternationalOPEN ACCESS Journal Of Modern Engineering Research (IJMER
  10. Prasanth S. Poduval, Dr. V. R. Pramod, Dr.Jagathy Raj V. P. "Barriers In TPM Implementation In Industries"INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 2, ISSUE 5, MAY 2013
  11. Prof. A.Bangar1, Hemlata sahu2, Jagmohanbatham "Improving Overall Equipment Effectiveness by Implementing Total Productive Maintenance in Auto Industry"International Journal of Emerging Technology and Advanced Engineering2012
  12. Syed Md. Shahwaz implementation of Total Productive Maintenance in Thermal Power Station(Barauni refinery) Intenational Journal of Engineering Research(IJOER)
  13. SuzaituladwiniHashim, NurulFadlyHabidin, JuriahConding, Nurzatul Ain, Seri LanangJwaya, AnisFazdlinMohdZubirTotal Productive Maintenance and Innovation Performance in Malaysian Automotive Industry International Journal of Engineering Research and Development 2012
  14. Mr.Kishor Kumar Aroor, Mr.MadhukaraNayak, Prof.Er.U.Sai Krishna Study of Total Productive Maintenance and Manufacturing Performance of a Manufacturing Industry IOSR Journal of Business and Management (IOSR-JBM) 2015
  15. Richa Sharma and Jagtar Singh Impact of Implementing Japanese 5S Practices on Total Productive Maintenance International Journal of Current Engineering and Technology 2015
  16. Thomas R. PomorskiTotal Productive Maintenance Concepts and Literature Review April 30, 2004
  17. McKone, K. E., R. G. Schroeder, et al. (1999). "Total Productive Maintenance: A contextual View." Journal of Operations Management
  18. Nakajima, S. (2000). The Lean-TPM Connection. The Lean Manufacturing Advisor
  19. Patterson, J. W., L. D. Fredendall, et al. (1996). "Adapting Total Productive Maintenance to Asten, Inc." Production and Inventory Management Journal
  20. Suzuki, T., Ed. (1994). TPM in Process Industries. Portland, OR, Productivity Press
  21. Leflar, J. (2003). TPM Interview. T. Pomorski. Fort Collins, CO
  22. Suehiro, K. (1987). Eliminating Minor Stoppages on Automated Lines. Portland, OR, Productivity Press.
  23. Tajiri, M. and F. Gotoh (1992). TPM Implementation - A Japanese Approach. New York, McGraw Hill.
  24. Wireman, T. (1991). Total Productive Maintenance - An American Approach. New York, Industrial Press.
  25. Taylor, F. W. (1911). Shop Management. New York, NY, Harper
  26. Takahashi, Y. and T. Osada (1990). TPM: Total Productive Maintenance. Tokyo, Asian Productivity Organization.
  27. Nishinaga, H. (1999). "Construction of a System for Efficient Predictive Maintenance." JIPM TPM
  28. Shirose, K. (1992). TPM for Operators. Portland, OR, Productivity Press
  29. Ichikawa, A. (1999). "How to Incorporate New Environmental Management Problems in TPM Activities."
  30. Hartmann, E. (1992). Successfully Installing TPM in a Non-Japanese Plant. Pittsburgh, PA, TPM Press, Inc.
  31. I.Y. Shevster, V.L. Morking, C. Esveld. (2008) Design of railway wheel profile taking into account rolling contact fatigue and wear.
  32. TED Jackson. (2017) 18 Key Peformance Indicators (KPI)

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-04-30

Issue

Volume 4, Issue 5, March-April-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Munyaradzi Kapuyanyika, Kinjal Suthar, " To Improve the Overal Equipment Effectiveness of Wheel Surface Machining Plant of Railway Using Total Productive Maintenance, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 5, pp.1860-1874, March-April-2018.