Electrochemical Investigations on Poly (ethylene oxide)-Based Nanocomposites laden with BaTiO3-Grafted-Graphene oxide

Authors

  • S. Padmaja  Department of Physics, Lady Doak College, Madurai, Tamil Nadu, India
  • Suryasarathi Bose  Materials Engineering Department, Indian Institute of Science, Bangalore, Karnataka , India
  • R. Nimma Elizabeth  Department of Physics, Lady Doak College, Madurai, Tamil Nadu, India

Keywords:

Electrochemistry; composites;ionic conductivity;tensile; thermogravimetric analysis (TGA)

Abstract

Nanocomposite polymer electrolytes (NCPE) comprising poly(ethylene oxide)(PEO), lithium trifluro methane sulphonate (LiCF3SO3) and barium titanate-grafted-graphene oxide (BaTiO3-g-GO) were successfully prepared by a simple hot-press technique. The ionic conductivity was increased up to one order upon addition of BaTiO3-g-GO in the polymeric matrix. The membranes were subjected to themogravimetric, tensiles. Appreciable ionic conductivity, thermal stability and mechanical properties qualify these membranes as electrolytes for all-solid-state-lithium batteries.

References

  1. Tarascon, J.M.; Armand, M. (2008), Building better batteries,Nature, 451, 652-657.
  2. Tarascon, J.M.; Armand, M.(2001),Issues and challenges facing rechargeable lithium batteries, Nature, 414, 359.
  3. Bruce, P. G.;ScrosatiB.;Tarascon,J.M(2008),Nanomaterials for rechargeable lithium batteries.;Angew. Chem.Intl. Edn Engl. 47(16),2930-2946.
  4. Tanaka, T.; Ohta, K.; Arai, N.; (2001), Year 2000 R&D status of large-scale lithium ion secondary batteries in the national project of Japan ,J Power Sources, 97-98,2.
  5. Dell, R. M.; Rand, D.A.J (2001),Energy storage-a key technology for global energy sustainability, J Power Sources,100,2
  6. Tarascon, J.M.; Armand, M.(2001), Issues and challenges facing rechargeable lithium batteries. Nature, 414, 359.
  7. Subramaniyan, V.; Luo, C.; Manuel Stephan, A.; Nahm, K. S.; Thomas, S. (2007),Supercapacitors from Activated Carbon Derived from Banana Fibers, J Phys Chem C, 111, 7527-7538.
  8. Winter, M. R. J.; Bhod, (2004),What Are Batteries, Fuel Cells, and Supercapacitors ,Chem. Rev , 104,4245-4260.
  9. Xue Z.; He D.; Xie X.(2015),Iron-catalyzed atom transfer radical polymerization, Polym. Chem.,6, 1660-1687.
  10. Manuel Stephan,A. (2006), Review on gel polymer electrolytes for lithium batteries,Eur. Polym. J.,21, 21-42.
  11. Bouchet, R.; Lascaud, S.; Rosso, M.; (2003), An EIS study of the anode Li/PEO-LiTFSI of a Li polymer battery, J Electrochem. Soc,150, A1385-A1389
  12. Fenton,D.E.;Parker, J.M.;Wright, P.V.;1973, Solid polymeric electrolyte of poly(ethylene)oxide-50% epoxidized natural rubber-lithium triflate (PEO-ENR50-LiCF3SO3),Polymer ,14, 589.
  13. Manuel Stephan,(2006), Review on gel polymer electrolytes for lithium batteries; Eur. Polym. J. 21,21-42.
  14. Appetecchi G.B.;Croce F.; Scrosati, S.; 1990,Kinetics and stability of the lithium electrode in poly(methylmethacrylate,Electrochim Acta ,20,991-997.
  15. Manuel Stephan, A.; Gopukumar, S.; Renganathan, N.G.; Nathan, M.A.K. (2005)A high-performance BaTiO3-grafted-GO-laden poly(ethylene oxide)-based membrane as an electrolyte for all-solid lithium-batteries; Eur.Poly . J,41,15-21.
  16. Manuel Stephan, A.; Nahm, K.(2006),Review on composite polymer electrolytes for lithium batteries;Polymer,47, 5952-5964
  17. Vincent, C.; Scrosati, B.; (2000) ,Polymer Electrolytes: The Key to Lithium Polymer Batteries,Matter.Res Soc 2000,25,28-30.
  18. Weston, J.E.;Steele, B.C.H. (1982),Effects of inert fillers on the mechanical and electrochemical properties of lithium salt-poly(ethylene oxide) polymer electrolytes; Solid State Ionics,7,75-79
  19. Scrosati,B. (2005)Power sources for portable electronics and hybrid cars: lithium batteries and fuel cells; Chem Rec,5,286-297.
  20. Croce, F.; Appetecchi ,G.B.;Perci, L.; Scrosati, S.(1998),Nanocomposite polymer electrolytes for lithium batteries, Nature;394:456-458
  21. Croce,F.; Curini ,R.; Martinelli, A.; Ronci, F.; Scrosati, B.; Caminiti, R.(1999), Physical and Chemical Properties of Nanocomposite Polymer Electrolytes, J Phys Chem;103,10632.-10638.
  22. Croce, F.; Settimi, L.; Scrosati, B.;(2006), Nanocomposite, PEO-LiBOB polymer electrolytes for low temperature, lithium rechargeable batteries, Electrochem,8,364-368
  23. Xi, J.; Qiu, X.; Cui, M.; Tang, X.; Zhu, W.; Chen, L.; (2006),High discharge capacity solid composite polymer electrolyte lithium battery,J Power Sources,156,581-588.
  24. Sun, H. Y.; Takeda,Y.; Imanishi, N.; Yamamoto, O. (2000),Polymer Electrolytes for Lithium Polymer Batteries; Sohn H. J.; J Electrochem Soc,147, 2462-2467.
  25. Li, Q.; Takeda,Y.; Imanishi,N.; Yang, J.; Sun, H. Y.; Yamamoto O. (2001),Ferroelectric Materials as a Ceramic Filler in Solid Composite Polyethylene Oxide?Based Electrolytes;J Power Sources,97-98,795-797
  26. Li, Q.; Sun, H.Y.; Takeda, Y.; Imanishi, N.; Yang, J.; Sun,H. Y.; Yamamoto, O.;J Power Sources 2002,94,201-205
  27. Shin, J.H.; Alessandrini, F.; Passerini, S. (2005), Electrochemical and mechanical properties of nanochitin-incorporated PVDF-HFP-based polymer electrolytes for lithium batteries; J Elecrochem. Soc,152,A283-A288.
  28. Manuel Stephen, A.; Prem kumar, T.; Nathan, A.K.; Angulakshmi, N. (2009),Chitin-Incorporated Poly(ethylene oxide)-Based Nanocomposite Electrolytes for Lithium Batteries. J Phys Chem B,113,1963-1971.
  29. Appetecchi G.B.;Hassoun, J.; Scrosati, S.; Croce F.;Cassel, F.; Salomon,M.; 2003, Hot-pressed, solvent-free, nanocomposite, PEO-based electrolyte membranes: II. All solid-state Li/LiFePO4 polymer batteries,Power Sources J29. ,124,246-253.
  30. Croce, F.; Perci, L.; Scrosati, B.; Fiory, F. S.;Plichta, E.; Hendrickson, M. A,(2001),Composites polymer electrolytes for electrochemical devices,Electrochim Acta 2001,46,2457-2461.
  31. Angulakshmi, N.;Nathan, M.A.K.;Kumar R.S.; Manuel Stephen, A.(2014) Composite Polymer Electrolytes Encompassing Metal Organic Frame Works: A New Strategy for All-Solid-State Lithium Batteries,J Phys.Chem 2014 C118, 240-247.
  32. Gerbaldi,C.; Nair,J. R..; Nathan, M. A. K.; Kumar, R. S.; Ferrara, C.; Mustarelli, P.; Manuel Stephan, A. (2014),A high-performance BaTiO3-grafted-GO-laden poly(ethylene oxide)-based membrane as an electrolyte for all-solid lithium-batteries, J. Mater.Chem.,A 2, 9948- 9954.
  33. Angulakshmi N.; Nahm,K.S.; Jijeesh, R. Nair; Gerbaldi, C; Bongiovanni,R; Penazzi, N; Manuel Stephan, (2013),Cycling profile of MgAl2O4-incorporated composite electrolytes composed of PEO and LiPF6 for lithium polymer batteries, Electrochimica Acta,90, 179–185
  34. Shodai, T.; Owens,B. B.; Ostsuka,M.; Yamki,J. (1994),Electrochemical and mechanical properties of nanochitin-incorporated PVDF-HFP-based polymer electrolytes for lithium batteries, J Electrochem Soc,141, 2978-2981.
  35. Fan, L. Z.; Maier,(2006), Composite effects in poly(ethylene oxide)–succinonitrile based all-solid electrolytes,J Electrochem Commun,8, 1753-1756.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-07-30

Issue

Volume 4, Issue 9, July-August-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
S. Padmaja, Suryasarathi Bose, R. Nimma Elizabeth, " Electrochemical Investigations on Poly (ethylene oxide)-Based Nanocomposites laden with BaTiO3-Grafted-Graphene oxide, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 9, pp.87-92, July-August-2018.