Review of Design and Analysis of Box Girder Bridges And T-Beam Bridges Using IRC Codes
DOI:
https://doi.org//10.32628/IJSRST207332Keywords:
IRC: 21-2000, IRC: 112-2011.Abstract
Bridge is the structure which is used for carrying the traffic over the valley or river by connecting highways or railways. There are types of bridges which are T-beam bridges and box girder bridges where the T-beams are effective in resisting bending providing ductility to the bridges. While box girders gives high torsional stiffness providing ductility, stability and also aesthetics. Different codes with varying design philosophy are used for designing these bridges such as IRC:21-2000 and IRC:112-2011. Hence the purpose of this paper is to compare the results of analysis and design of different papers performed using these codes for both the types of bridges i.e. T-beam and box girder bridge. Various researchers studies are available on the design and analysis of T-beam bridge and box girder bridge using IRC:112-2011 and IRC:21-2000. The purpose of this study is to determine the most economical and preferable design code for both T-beam bridges and box girder bridges.
References
- Fahad P. P. , Priyanka Dilip P, “ Analysis and Design of Post Tensioned Box Girder Bridge Using SAP 2000,” IJSRSET , Volume 3 , Issue 2 , Print ISSN: 2395-1990, Online ISSN : 2394-4099,2017.
- Phani Kumar, S.V.V.K.Babu, D.Aditya Sai Ram, “Analysis and Design of Prestressed Box Girder Bridge by IRC: 112-2011,” International Journal of Constructive Research in Civil Engineering (IJCRCE) Volume 2, Issue 2, PP 1-10 ISSN 2454-8693, 2016.
- Sanket Patel, Umang Parekh, “Comparative Study of PSC. Tee Girder and PSC.Box Girder,” IJSTE - International Journal of Science Technology & Engineering , Volume 2 , Issue 11 , May 2016.
- Pragya Soni, Dr. P.S. Bokare, “Review of Design Procedure for Box Girder Bridges,” International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; Volume 5 Issue IX, September 2017.
- Jagdish Chand, Ravikant, “Design and Analysis of Bridge Girders using Different Codes”, International Journal of Engineering and Innovative Technology (IJEIT), ISSN: 2278-0181, Vol 8 Issue 07, July-2019.
- R.Shreedhar, Spurti Mamadapur, “Analysis of T-beam Bridge Using Finite Element Method”,International Journal of Engineering and Innovative Technology (IJEIT), Issue 3, Volume 2, September 2012.
- T. Sujatha ,Y. Yadu Priya , “Comparative Analysis of Post Tensioned T-Beam Bridge Deck by Rational Method and Finite Element Method,” International Journal of Research in IT, Management and Engineering, ISSN 2249-1619, Issue 09,Volume 06, September 2016.
- Sharu.E ,Nivedhitha M and Gowtham Raja M , “design of RCC t-beam bridge considering overloading due to congestion,” Indian J.Sci.Res. 17(2): 211 - 216, 2018.
- Prof. R.B. Lokhande ,Abrar Ahmed,“comparative analysis and design of t-beam and box girders,” International Research Journal of Engineering and Technology (IRJET) Volume: 04 Issue: 07 , e-ISSN: 2395-0056 | July -2017.
- Sudip Jha, Cherukupally Rajesh, P.Srilakshmi, “Comparative Study of RCC Slab Bridge by Working Stress (IRC: 21-2000) and Limit State (IRC: 112-2011),” Volume No: 2, Issue No: 8 ISSN No: 2348-4845, August 2015.
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST
This work is licensed under a Creative Commons Attribution 4.0 International License.
