Parametric Study on Turning of AISI 1040 Steel
DOI:
https://doi.org/10.32628/IJSRST218436Keywords:
Turning, Cutting Surface Roughness, Design of experimentAbstract
Turning is a most popular cutting process which is widely used in small as well as the large-scale industries. The selection of better combination of the input parameter be means enhancement in productivity. The aim of this paper is to the study effect of ( Cutting Speed, Depth of cut, Feed rate ) on surface roughness and to obtained the data.
References
- A. R .Yildiz , “ A comparative study of population –based optimization algorithm for Turning operation”, Inform.Sci,vol.210,pp.81-88,2012.
- R. N .Yadav ,“Experimental study and parameter optimization of duplex turning process” ,Material performance and Characterization, vol.7,No, 1, pp, 423-444,2018.
- Ravidra Nath Yadav,“Development and experimental investigation of duplex turning process’’,Adv.Mauf.5:149-157/S 40436-017-0177-6,2017.
- S. A Niknam, SKamalizadeh and A.Asgar ,Balazinki ,“Turning titanium matrix composites (Ti-MMCs) with carbide and CBN insert ”,Int.J.Adv.Manuf.Technol,97,pp.253-265,2018.
- M. Saini, R .N Yadav and Kumar and Kumar , “An overview of Turning process Proceeding of the Ist International conference on advancements and Recent Innovation in Mechanical ,Production and Industrial Engineering”,(ARIMPIE-2015) ,ITS Engineering College ,Greater Noida ,India ,10-11 April ,vol.1,pp.377-386,2015
- J.P Davim ,“ Design of optimization for turning parameters for cutting metal matrix composites base on orthogonal arrays”,J.Mater .Process Technol,vol .1,pp.340-344,2003.
- R.N Yadav ,S.Mishra and M.Yadav ,“A state of art on Turning of metal matrix composites” ,Proceeding of the 3rd international conference on Advancements and Recent Innovation in Mechanical ,Production and Industrial Engineering (ARIMPIE-2017),ITS Engineering College ,Greater Noida ,21-22 April ,pp. 306-311 ,2017.
- I.O.Fagbolagun and S.A .OKe,“The Optimization of Packaging System Process Parameters Using Taguchi Method”, International Journal of Industrial Engineering and Engineering Management (IJIEEM), vol.2.No.1 July 2020.
- M .Manoj ,A.Gopal ,V Patil , K.Ashish ,Saloni ,S.Aditya,“Modelling and Analysis of Turning process on Lathe Machine By Taguchi and Anova Approach” ,International journal of Scientific and technology research vol.2 ,pp. .1466-1470,2019.
- Hassan and Afzal ,“Multi –objective of Turning operation of stainless steel using a Hybrid Whale optimization Algorithm”, J. Manuf .Mater .Process ,vol 45 ,pp4-64 ,2020.
- Mst. Nazma Sultana and Nikhil Rajan Dhār, “Hybrid GRA –PCA and Modified weighted TOPSIS Coupled with Taguchi for multi –Response process Parameter optimization in TurningAISI1040steel”,volume68,DOI:10.24425/ame.2020.
- Djordje Vukelic a Katica Simunovic ,“Multi objective optimization of steel AISI1040 Dry turning using genetic Algorithm”, link Published 07 April 2021 .
- L U .Ayur and H . Kazan ,“ Finite element Modelling of power consumption in turning of AISI1040 steel”, journal of engineering research and applied science ,vol 9,No.2 December 2020 .
- Anil kumar Parida and Shatrughan ,“Multistage Deep Drawing with Ironing of AI-killed AISI1040 Graded medium carbon steel a parametric study” ,Articles Mot ,Res 20 ,4july –Aug 2017.
- Mahammad Aamir, Shanshan Ti ,Toloues.Rad Khalid Giasin and A. Vafadar ,“optimization and Modelling of process Parametric in Modelling of process Parameters in Multi –Hole Simultaneous Drilling using Taguchi Method and Fuzzy Logic Approach”,Material,13,680,do,103390/Ma/13030680,2020 .
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST

This work is licensed under a Creative Commons Attribution 4.0 International License.