A Comprehensive Analysis of Light Weight Steel Structure and Wind Load

Authors

  • Nitin Khare  Postgraduate Student, Department of Civil Engineering, Jabalpur Engineering College, Jabalpur, Madhya Pradesh, India
  • Dr. Rajeev Chandak  Professor, Department of Civil Engineering, Jabalpur Engineering College, Jabalpur, Madhya Pradesh, India

DOI:

https://doi.org//10.32628/IJSRST218650

Keywords:

Damage, Light Steel Structures, Cladding, Purlin, Wind Hazards

Abstract

Review to hot-rolled steel structures, cold-formed steel structures are susceptible to extreme winds because of the light weight of the building and its components. Many modern cold-formed steel structures have sustained significant structural damage ranging from loss of cladding to complete collapse in recent cyclones. This article first provides Review some real damage cases for light steel structures induced by the high winds. After that, the paper reviews research on the damage analysis and evaluation of light steel structures caused by strong winds, which include connection failure, fatigue failure, purlin buckling, and primary frame component instability problems. Moreover, this review will mention some applications of structure damage assessment methods in this area, such as vulnerability analysis and performance-based theory, etc.

References

  1. PabloJaen-Sola, Lightweight design of direct-drive wind turbine electrical generators: A comparison between steel and composite material structures, Ocean Engineering, Volume 181, 1 June 2019, Pages 330-341,
  2. TianlinZhong, Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting, Materials & Design, Volume 181, 5 November 2019, 108076.
  3. W.J.Lu, Influence of κ-carbide interface structure on the formability of lightweight steels, Materials & Design, Volume 104, 15 August 2016, Pages 211-216.
  4. K.M.A.Sohel, Behavior of Steel–Concrete–Steel sandwich structures with lightweight cement composite and novel shear connectors, Composite Structures, Volume 94, Issue 12, December 2012, Pages 3500-3509.
  5. Chan-YoungLee, Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite, Acta Materialia, Volume 84, 1 February 2015, Pages 1-8.
  6. GersonMeschut, Hybrid Technologies for Joining Ultra-high-strength Boron Steels with Aluminum Alloys for Lightweight Car Body Structures, Procedia CIRP, Volume 23, 2014, Pages 19-23.
  7. Sura A.Zaid, Effect of reinforcement on the performance of steel tubular truss girder infilled with lightweight concrete, Materials Today: Proceedings, Available online 7 November 2021.
  8. SaeedTaali, Architectured lightweight steel composite: evaluation of the effect of geometrical parameters and annealing treatments on deformation behavior,  Journal of Materials Research and Technology, Volume 15, November–December 2021, Pages 5414-5427.
  9. XuLingLiujing, - Analysis on housing system of lightweight steel structures and joint connection behavior, Fourth International Conference on Advances in Steel Structures Proceedings of the Fourth International Conference on Advances in Steel Structures 13–15 June 2005, Shanghai, China, Volume I, 2005, Pages 875-880.
  10. Y.X.Chen, Development of cement-free bio-based cold-bonded lightweight aggregates (BCBLWAs) using steel slag and miscanthus powder via CO2 curing, Journal of Cleaner Production, Volume 322, 1 November 2021, 129105.
  11. ChunzeYan, Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting, Materials & Design, Volume 55, March 2014, Pages 533-541.
  12. C.D.Horvath, 2 - Advanced steels for lightweight automotive structures, Materials, Design and Manufacturing for Lightweight Vehicles, Woodhead Publishing Series in Composites Science and Engineering , 2010, Pages 35-78.
  13. M.Eskandari, Potential application of nanocrystalline 301 austenitic stainless steel in lightweight vehicle structures, Materials & Design, Volume 30, Issue 9, October 2009, Pages 3869-3872.
  14. K.I.Christidis, Flexural behaviour of pumice lightweight concrete reinforced with end-hooked steel fibres, Structures, Volume 33, October 2021, Pages 3835-3847.
  15. GokhanKaplan, Effect of high volume fly ash and micro-steel fiber on flexural toughness and durability properties in self-compacting lightweight mortar (SCLM), Construction and Building Materials, Volume 307, 8 November 2021, 124877.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2021-12-30

Issue

Volume 8, Issue 6, November-December-2021

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Nitin Khare, Dr. Rajeev Chandak, " A Comprehensive Analysis of Light Weight Steel Structure and Wind Load , International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 8, Issue 6, pp.396-403, November-December-2021. Available at doi : https://doi.org/10.32628/IJSRST218650