A Review on Industrial Fibre Hybrid Composites for Automotive Safety Application

Authors

  • Michael Roger Naveen  Research Scholar, Department of Mechanical Engineering, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, Tamil Nadu, India
  • K. Logesh  Assistant Professor, Department of Mechanical Engineering, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, Tamil Nadu, India

Keywords:

Treatment, FML, Aluminium, Fracture toughness, Composite materials, Corrosion, Laminate material.

Abstract

The FML is newest classification of metal and it is having more demand due to it higher mechanical and metallurgical property. Few materials can be produced by the diversity of behaviours which depends on the shape, cost etc. However, the fibre metal laminate is subject to imperfections, which are directed by various factors namely, skin type, core, treatment process, load and preparation method. The conceivable faults can be overwhelmed by the next care though the preparation of the materials as per the requirement. The fibre metal laminate is used to various demands less weight to more strength ratio like automobile sector, aeronautical, structure and marine applications etc.

References

  1. Fuentes C.A., Ting K.W, Dupont-Gillain C, Steensma M, Talma A.G, Zuijderduin R, Van Vuure A.W, (2016) Effect of humidity during manufacturing on the interfacial strength of non-pre-dried flax fibre/unsaturated polyester composites, Composites: Part A 84, 209– 215.
  2. Hou M, Ye L, Lee H.J, Mai Y.W, (1998) Manufacture of a Carbon-Fabric-Reinforced Polyetherimide (CF/PEI) Composite Material, Composites: Science and Technology, 58(2), pp: 181-190.
  3. Alderliesten R.C, Benedictus R, (2007) Fiber/Metal Composite Technology for Future Primary Aircraft Structures , 48th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 15(0), pp: 1–12.
  4. Zhang H, Gn S.W, An J, Xiang Y, Yang J.L, (2014) Impact Behaviour of GLAREs with MWCNT Modified Epoxy Resins , Experimental Mechanics, 54:83–93.
  5. Logesh K, Bupesh Raja V.K, Sasidhar P, (2015) An Experiment about Morphological Structure of Mg-Al Layered Double Hydroxide using Field Emission Scanning Electron Microscopy with EDAX Analysis , International Journal of ChemTech Research, 8 (3), pp: 1104-1108.
  6. Sang Yoon Park, Won Jong Choi, Heung Soap Choi, Hyuk Kwon, Effects of surface pre-treatment and void content on GLARE laminate process characteristics, Journal of Materials Processing Technology 210 (2010) 1008–1016.
  7. Dilip Raja N, Velu R, Selvamani S.T, Palani Kumar K, (2015) The Comparative Analysis of Mechanical Properties on MMC (AA6061 + SiCp 10% wt) Before and After Age Hardening , Applied Mechanics and Materials, 766-767 (0), pp: 276-280.
  8. Norshah Aizat Shuaib, Paul Tarisai Mativenga, (2016) Energy demand in mechanical recycling of glass fibre reinforced thermoset plastic composites , Journal of Cleaner Production, 120, 198-206.
  9. Logesh K, Bupesh Raja V.K, (2014) Investigation of Mechanical Properties of AA8011/PP/AA1100 Sandwich materials , International Journal of ChemTech Research, 6 (3), pp: 1749-1752.
  10. Botelho E.C, Campos A.N, de Barros E., Pardini L.C, Rezende M.C, (2006) Damping behavior of continuous fiber/metal composite materials by the free vibration method , Composites: Part B 37, 255–263.
  11. Yun L, Jin P, Koichi G, Hideharu F, (2012) Effect of the Matrix Properties on the Strength and Reliability of Fiber Reinforced Metals Composite , http://www.iccmcentral.org /Proceedings / ICCM12 proceedings / site / papers / pap 405.pdf.
  12. Yun L, Jin P, Koichi G, Hideharu F, (2012) Effect of the Matrix Properties on the Strength and Reliability of Fiber Reinforced Metals Composite , http://www.iccmcentral.org /Proceedings / ICCM12 proceedings / site / papers / pap 405.pdf.
  13. Sugun B.S, Rao R.M.V.G.K, Venkatasubramanyam D.V, (2008) Cost-Effective Approach for the Manufacture of Fibre Metal Laminates (FML) , Proceedings of the International Conference on Aero Science and Technology, Bangalore, India, 26-28.
  14. Changlei Xia, Sheldon Q. Shi, Liping Cai, (2015) Vacuum-assisted resin infusion (VARI) and hot pressing for CaCO3 nanoparticle treated kenaf fiber reinforced gineering, Article ID 356824, http://dx.doi.org/10.1155/2013/356824
  15. Gresham J, Cantwell W, Cardew-Hall M.J, Compston P, Kalyanasundaram S, (2006) Drawing Behaviour of Metal–Composite Sandwich Structures , Composite Structures, 75 (0), pp: 305–312.
  16. Gresham J, Cantwell W, Cardew-Hall M.J, Compston P, Kalyanasundaram S, (2006) Drawing Behaviour of Metal–Composite Sandwich Structures , Composite Structures, 75 (0), pp: 305–312.
  17. Gresham J, Cantwell W, Cardew-Hall M.J, Compston P, Kalyanasundaram S, (2006) Drawing Behaviour of Metal–Composite Sandwich Structures , Composite Structures, 75 (0), pp: 305–312.
  18. Gresham J, Cantwell W, Cardew-Hall M.J, Compston P, Kalyanasundaram S, (2006) Drawing Behaviour of Metal–Composite Sandwich Structures , Composite Structures, 75 (0), pp: 305–312.
  19. Alfred C.L, Goker T, Kia L, Roberto J.C, (2010) Development and Verification of a Model of the Resin Infusion Process During Manufacture of Fiber Metal Laminates by VARTM , The 10th International Conference on Flow Processes in Composite Materials (FPCM10) Monte Verità, Ascona, CH, 11-15.
  20. Grujicic M, Chittajallu K.M, Shawn Walsh, (2005) Non-isothermal preform infiltration during the vacuum-assisted resin transfer molding (VARTM) process, Applied Surface Science, 245, 51–64.
  21. Damodar A, Prasad C, Cheryl R, Paolo F, Wade J, (2005) Scaling the Non-Linear Impact Response of Flat and Curved Composite Panels , 46th AIAA/ASME/ ASCE / AHS / ASC Structures, Structural Dynamics and Materials Conference, American Institute of Aeronautics and Astronautics.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2021-04-10

Issue

Volume 9, Issue 1, March-April-2021

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Michael Roger Naveen, K. Logesh, " A Review on Industrial Fibre Hybrid Composites for Automotive Safety Application, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 9, Issue 1, pp.699-707, March-April-2021.