Development of Sustainable Construction Materials : MSWI Bottom Ash Optimization

Authors

  • Ashwini Tiwari   Assistant Professor, Civil Engineering Department, Rajkiya Engineering College Mainpuri, India

DOI:

https://doi.org/10.32628/IJSRST2295222

Keywords:

MSWI Bottom Ash, Decision Support System (DSS), Sustainable Construction, Waste Utilization, Environmental Impact

Abstract

This paper explores the development of a Decision Support System (DSS) aimed at optimizing the use of Municipal Solid Waste Incineration (MSWI) bottom ash in construction materials. With increasing waste generation and the need for sustainable construction practices, the utilization of MSWI bottom ash presents an opportunity to mitigate environmental impact. The DSS integrates multi-criteria decision-making methods, environmental assessments, and material performance evaluations to provide an optimal solution for incorporating MSWI bottom ash in construction applications. The system's effectiveness was validated through case studies and sensitivity analysis, showing potential for widespread adoption in the construction industry. This paper presents the development of a decision support system (DSS) to optimize the utilization of MSWI bottom ash in construction materials. The DSS integrates expert knowledge, machine learning algorithms, and linear programming to provide a comprehensive solution for MSWI bottom ash utilization.

References

  1. P. Apostoli, S. Giusti, D. Bartoli, A. Perico, P. Bavazzano, and L. Alessio, "Multiple exposureto arsenic, antimony, and other elements in art glass manufacturing," Am. J. Ind. Med., vol. 34, no. 1, pp. 65-72, 1998.
  2. R. Barbosa, N. Lapa, D. Dias, and B. Mendes, "Concretes containing biomass ashes:mechanical, chemical, and ecotoxic performances," Constr. Build. Mater., vol. 48,pp. 457-463, 2013.
  3. EC, "Council of the European Union, 2003/33/EC, Council Decision establishing criteria and procedures for the acceptance ofwaste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC," Off. J. Eur. Commun., pp. 27-49, 2003.
  4. CEMWE, "Criteria and evaluation methods for waste ecotoxicity," French Ministry of the Environmental Directorate for Pollution Prevention and Risk Control, Paris, France, 1998.
    1. A. Chen, "Synthesis of Portland Cement and Calcium Sulfoaluminate-Belite Cement for Sustainable Development and Performance,"
    • Z. Chen, Y. Liu, W. Zhu, and E. H. Yang, "Incinerator bottom ash (IBA) aerated geopolymer," Constr. Build. Mater., vol. 112, pp. 1025-1031, 2016.
    • H. Cheng and Y. Hu, "Municipal solid waste (MSW) as a renewable source of energy: current and future practices in China," Bioresour. Technol., vol. 101, no. 11, pp. 3816- 3824, 2010.
    • J. M. Chimenos, A. I. Fernández, L. Miralles, M.Segarra, and F. Espiell, "Short-term natural weathering of MSWI bottom ash as a function of particle size," Waste Manag., vol. 23, no. 10, pp.
    • J. B. Choi, S. M. Bae, T. Y. Shin, and K. Y. Ahn, "Evaluation of daphnia magna for the ecotoxicity assessment of alkali leachate from concrete," Int. J. Ind. Entomol., vol. 26, no. 1, pp. 41-46, 2013.
    • K. Chuenwong, S. Chiarakorn, and B. Sajjakulnukit, "Specific energy consumption and carbon intensity of ceramic tablewares: small enterprises (SEs) in Thailand," J. Clean. Prod., vol. 147, pp. 395-405, 2017.
    • Comité Européen de Normalisation, "Construction products: assessment of release ofdangerous substances - Guidance on the use of ecotoxicity tests applied to construction products," Brussels, 2017.
    • G. Cornelis, T. Van Gerven, and C. Vandecasteele, "Antimony leaching from uncarbonated and carbonated MSWI bottom ash," J. Hazard. Mater., vol. 137, no. 3, pp. 1284-1292, 2006.
    • J. A. Cusidó and L. V. Cremades, "Environmental effects of using clay bricks produced with sewage sludge : Leachability and toxicity studies," Waste Manag., vol. 32, no.6, pp. 1202-1208, 2012.
    • R. del Valle-Zermeno, J. Gomez-Manrique, J. Giro-Paloma, and J. M. Chimenos, "Material characterization of the MSWI bottom ash as a function of particle size. Effects of glass recycling over time," Sci. Total Environ., vol. 581-582, pp. 1345-1353, 2017.
    • P. Duxson, J. L. Provis, and G. C. Lukey, "Designing precursors for geopolymer cements," J. Am. Ceram. Soc., vol. 91, no. 12, pp. 3864- 3869, 2008.
    • P. Duxson, J. L. Provis, G. C. Lukey, S. W. Mallicoat, W. M. Kriven, and J. S. J. van Deventer, "Understanding the relationship between geopolymer composition, microstructure and mechanical properties," Colloids Surf. A Physicochem. Eng. Asp., vol. 269, no. 1-3, pp. 47-58, 2005.
    • P. Duxson, J. L. Provis, G. C. Lukey, S. W. Mallicoat, W. M. Kriven, and J. S. J. van Deventer, "Geopolymer technology: the current state of the art," J. Mater. Sci., vol. 42, no. 9, pp. 2917-2933, 2007.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-07-30

Issue

Volume 4, Issue 9, July-August-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Ashwini Tiwari "Development of Sustainable Construction Materials : MSWI Bottom Ash Optimization" International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 4, Issue 9, pp.476-481, July-August-2018. Available at doi : https://doi.org/10.32628/IJSRST2295222