Surveying The Effect of Cutting Parameters on Cutting Force and Surface Roughness When Milling 42Mo Steel with Tin Coating Insert

Authors

  • Do Thi Kim Lien  Faculty of Mechanical Engineering, Viet Hung Industrial University, Vietnam
  • Nguyen Dinh Man  Faculty of Mechanical Engineering, Thai Nguyen University of Technology, Vietnam
  • Phung Tran Dinh  Faculty of Mechanical Engineering, Viet Hung Industrial University, Vietnam

DOI:

https://doi.org/10.32628/IJSRST2310139

Keywords:

Cutting parameter, cutting force, surface roughness, surface milling, 42Mo steel, TIN coated milling cutter

Abstract

In this paper, an experimental study was conducted to determine the influence of cutting parameters on cutting force and surface roughness when milling 42Mo steel. The cutting parameters mentioned in this study include cutting speed, rate and depth of cut. The cutting tool used in this study was a face mill, the cutting insert coated with TIN. The results have determined the level and influence of the cutting parameters as well as the influence of the interaction between these parameters on the cutting force and surface roughness. The relationship between cutting force, surface roughness and cutting parameters has also been established in this study. The reliability of those relationships has been verified by analyzing the graph comparing the probability distributions of the balances with the normal distribution and the graph representing the relationship between the balances and the corresponding values response of the regression model.

References

  1. Eyup Bagci, Ercüment U. Yüncüoğlu (2017), The Effects of Milling Strategies on Forces, Material Removal Rate, Tool Deflection, and Surface Errors for the Rough Machining of Complex Surfaces, Strojniški vestnik - Journal of Mechanical Engineering Vol. 63, No. 11, pp. 643-656.
  2. Mohammed T. Hayajneh, Montasser S. Tahat, Joachim Bluhm (2007), A Study of the Effects of Machining Parameters on the Surface Roughness in the End-Milling Process, Jordan Journal of Mechanical and Industrial Engineering, Vol. 1, No. 1, pp. 1-5.
  3. Dražen Bajić, Luka Celent, Sonja Jozić (2012), Modeling of the Influence of Cutting Parameters on the Surface Roughness, Tool Wear and Cutting Force in Face Milling in Off-Line Process Control, Strojniški vestnik - Journal of Mechanical Engineering 58, Vol. 11, pp. 673-682.
  4. Rui Wang, Bingxu Wang, Gary C. Barber, Jie Gu, J.David Schall (2019), Models for Prediction of Surface Roughness in a Face Milling Process Using Triangular Inserts, Lubricants, Vol. 7, No. 9; doi:10.3390/lubricants7010009.
  5. Wen-Hsiang Lai (2000), Modeling of Cutting Forces in End Milling Operations, Tamkang Journal of Science and Engineering, Vol. 3, No. 1, pp. 15-22.
  6. Zhongtao Fua, Wenyu Yanga, Xuelin Wanga, Jürgen Leopold (2015), Analytical Modelling of Milling Forces for Helical End Milling Based on a Predictive Machining Theory, 15th CIRP Conference on Modelling of Machining Operations, Procedia CIRP, Vol. 31, pp. 258 – 263.
  7. M. Sekuli, Z. Jurkovi, M. had Istevi, M. Gostimirovi (2010), The influence of mechanical properties of workpiece material on the main cutting force in face milling, METABK, Vol. 49, No. 4, pp. 339-342.
  8. Erol Kilickap, Ahmet Yardimeden, Yahya Hı¸sman Çelik (2017), Mathematical Modelling and Optimization of Cutting Force, Tool Wear and Surface Roughness by Using Artificial Neural Network and Response Surface Methodology in Milling of Ti-6242S, Applied Sciences, Vol. 7, No. 1064, doi:10.3390/app7101064
  9. Okokpujie Imhade P., Okonkwo Ugochukwu C. (2013), Effects of Cutting Parameters on Surface Roughness during End Milling of Aluminium under Minimum Quantity Lubrication (MQL), International Journal of Science and Research, Vol. 4, No. 5, pp. 2937-2943.
  10. Dung Hoang Tien, Do Duc Trung, Nguyen Van Thien, Nhu-Tung Nguyen (2021), Multi-objective optimization of the cylindrical grinding process of scm440 steel using preference selection index method, Journal of Machine Engineering, vol. 21, No. 3, 110-123.
  11. Jhy-Cherng Tsai1, Chung-Yu Kuo1, Zing-Ping Liu1 and Kelvin Hsi-Hung Hsiao (2018), An investigation on the cutting force of milling Inconel 718, MATEC Web of Conferences 169. https://doi.org/10.1051/matecconf/201816901039
  12. Anayet U Patwari, A.K.M. Nurul Amin, Waleed F. Faris (2009), Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and respose surface methodology, Journal of Mechanical Engineering, Vol. 40, No. 2, pp. 95-103.
  13. Hasan Gökkaya (2010), The Effects of Machining Parameters on Cutting Forces, Surface Roughness, Built-Up Edge (BUE) and Built-Up Layer (BUL) During Machining AA2014 (T4) Alloy, Strojniški vestnik - Journal of Mechanical Engineering, Vol. 56, pp. 584-593.
  14. B. N. Pathak, K. L. Sahoo, and Madhawanand Mishra (2013), Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys, Materials and Manufacturing Processes, No. 28, pp. 463–469.
  15. Do Duc Trung (2022), Multi-criteria decision making under the MARCOS method and the weighting methods: applied to milling, grinding and turning processes, Manufacturing review, Vol. 9, No. 3, pp. 1-14.
  16. Do Duc Trung (2021), Influence of cutting parameters on surface roughness in grinding of 65G steel, Tribology in industry, Vol. 43, No. 1, pp. 167-176.
  17. Muhammmad Yasir, Turnad Lenggo Ginta, Bambang Ariwahjoedi, Adam Umar Alkali, Mohd Danish (2016), Effect of cutting spedd and feed rate on surface roughness of AISI 316LSS using end-milling, ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 4, pp. 2496-2500.
  18. Do Duc Trung (2021), The combination of Taguchi–Entropy–WASPAS–PIV methods for multi-criteria decision making when external cylindrical grinding of 65G steel, Journal of Machine Engineering, Vol. 21, No. 4, pp. 90-105.
  19. Luis Wilfredo Hernández-González, Roberto Pérez-Rodríguez, Ana María Quesada-Estrada, Luminita Dumitrescu (2018), Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel, DYNA, 85(205), pp. 57-63,
  20. Douglas C. Montgomery (2012), Design And Analysis Of Experiments, John Wiln & Sons, Inc., 5th Edition.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2023-02-28

Issue

Volume 10, Issue 1, January-February-2023

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Do Thi Kim Lien, Nguyen Dinh Man, Phung Tran Dinh "Surveying The Effect of Cutting Parameters on Cutting Force and Surface Roughness When Milling 42Mo Steel with Tin Coating Insert" International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 10, Issue 1, pp.333-342, January-February-2023. Available at doi : https://doi.org/10.32628/IJSRST2310139