Synthesis and Characterization of Cdo-Cuo Nanocomposite by Sol-Gel Method
Keywords:
nanocomposite, sol-gel, synthesis, morphologyAbstract
The CdO-CuO nanocomposite was synthesized by sol-gel pyrolysis method by using their respective nitrate. Method is very simple and low cost. Synthesized material was analyzed by XRD , FESEM, EDS and FTIR to get structure, surface morphology and bonding respectively. XRD and SEM result confirmed the synthesis of CdO-CuO nanocomposite. The crystallite size determined by Scherrer’s formula was found to be 52.97 nm.
References
- Muralidharan V.S., and Subramania A., 2009, Nanoscience and technology, Crc Press, pp, 542.
- Gulce H., Eskizeybek V., Haspulat B., Sari F., Guce F., and Avci A., 2013, Ind. Eng. Chem. Res., 5D , pp.115
- Rajesh N., Kannan J.C., Leonardi S.G., Neri G., and Krishnakumar T., 2014, J. Alloys Compd., 607, pp. 54-60.
- Mohamed S.H., Hadia N.M.A., Diab A.K., and Abdel Hakeem A.M., 2014, J. Alloys Compd., 609, pp. 68-72.
- Khayati G.R., Dalvand H., Darezereshki E., and Irannejad A., 2014, Mater. Lett., 115, pp. 272-274.
- Subramanyam T.K., Rao G.M., Uthanna S., 2001, Mater. Chem. Phys. 69, pp.133.
- Gurumurugan K., Mangalaraj D., Narayandass Sa.K., Nakanishi Y., 1996, Mater. Lett.,28,pp.307.
- Ferro R., Rodriguez J.A., Vijil O., Morales-Acevedo A., Contreras-Puente G.,2000, Phys.Status Solidi ,177, pp. 477.
- Ramakrishna Reddy K.T., Shanthini G.M., Johnston D., Miles R.W.,2003, Thin Solid
- Films, 427,pp. 397.
- Thangaraju B., Kaliannan P., Semicond., 2000, Sci. Technol.,15, pp.542.
- Krunks M., Mellikov E., 1995, Thin Solid Films ,270, pp.33.
- Ashour A., Turk., 2003, J. Phys. 27, pp.551.
- Senthil K., Mangalaraj D., Narayandass Sa.K., Adachi S., 2000, Mater. Sci. Engg. B78, pp. 53.
- Thangaraju B., Kaliannan P., Semicond. 2000, Sci. Technol. 15, pp.849.
- Elidrissi B., Addou M., Regragui M., Bougrine A., Kachouane A., Bernede J.C., 2001, Mater. Chem. Phys., 68, pp.175.
- Gunasekaran M., Gopalakrishnan R., Ramasamy P., 2003 Mater. Lett., 58, pp. 67.
- Sahu N. And Duchaniya , 2013, J.Mater. Sci. and Surface Engg. , 1 (1), pp. 11-14
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST

This work is licensed under a Creative Commons Attribution 4.0 International License.