In-depth Analysis of Physico-Chemical parameters of Ground Water Condition in the Vicinity of Sugarmills, Meerut

Authors

  • Sujata Malik  Assistant Professor, Department of Chemistry, DN College, Meerut (UP) India
  • Yashowardhan  Associate Professor, Department of Chemistry, DN College, Meerut (UP) India

DOI:

https://doi.org/10.32628/IJSRST5231098

Keywords:

Sugar mill, Waste-water/ effluent, Ground water-suitability, Physico-chemical parameters

Abstract

The suspension system is used to isolate the chassis from the shock loads due to Irregularities of the road surface. This must be handled without impairing the stability, Steering or general handling of the vehicle. Suspension system for the cab is placed Betweenthe chassis using bolts. The loads coming from the floor and the chassis are taken by the suspension. The model is designed in PRO- E and translated to Ansys 10.0. The model is simplified in Ansys by using the preprocessor. Constraint equations and couples are used to connect various regions of the suspension system. The loads are applied on the top flange of the suspension system. Static analysis is made to study the deflection of the suspension system. Modal analysis is made to check the natural frequencies. Harmonic analysis is also done to plot various graphs between frequency and amplitude. Results and discussions are made from the results obtained from the Ansys and conclusions are given and scope for future work is also given.

References

  1. Paruch, A. M., Pulikowski, K., Bawiec, A., & Pawęska, K. (2017). Assessment of groundwater quality in areas irrigated with food industry wastewater: a case of wastewater utilisation from sugar and yeast factories. Environmental Processes, 4, 799-812.
  2. Ayyasamy PM, Yasodha R, Rajakumar S et al (2008) Impact of sugar factory effluent on the growth and biochemical characteristics of terrestrial and aquatic plants. Bull Environ Contam Toxicol 81:449
  3. Baruah AK, Sharma RN, Borah GC (1993) Impact of sugar mill and distillery effluents on water quality of river Gelabil Assam. Indian J Env Health 35(4):288–293
  4. Kumar, D. S., & Srikantaswamy, S. (2015). Evaluation of effluent quality of a sugar industry by using physico-chemical parameters. International Journal of Advanced Research in Engineering and Applied Sciences, 4(1), 16-25.
  5. Jangid, J. (2019). Optimizing Energy Consumption in Embedded and Optical Network Devices Using Trained Deep Neural Networks. Well Testing Journal, 28(2), 31-51
  6. Arivoli, A., Naveen, X. A. J., & Thangavelu, S. (2021). Impact of Sugar Mill Effluent on the Quality of Groundwater in Cuddalore District, Tamil Nadu, India. Bioremediation and Green Technologies: Sustainable Approaches to Mitigate Environmental Impacts, 41-52.
  7. Deshmukh, K. K.(2014). Environmental impact of sugar mill effluent on the quality of groundwater from Sangamner, Ahmednagar, Maharashtra, India. Res J Recent Sci 3:385–392

International Journal of Scientific Research in Science and Technology

Downloads

Published

2023-02-09

Issue

Volume 10, Issue 1, January-February-2023

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Sujata Malik, Yashowardhan "In-depth Analysis of Physico-Chemical parameters of Ground Water Condition in the Vicinity of Sugarmills, Meerut " International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 10, Issue 1, pp.802-810, January-February-2023. Available at doi : https://doi.org/10.32628/IJSRST5231098