Technical Review of Additive Manufacturing technique in Patternless Casting Manufacturing

Authors

  • Yashkumar Patel  Mechanical Engineering Department, Vadodara Institute Of Engineering, Vadodara, Gujarat, India
  • Ankit Kahar  Mechanical Engineering Department, Vadodara Institute Of Engineering, Vadodara, Gujarat, India
  • Dhaval Doshi  Mechanical Engineering Department, Vadodara Institute Of Engineering, Vadodara, Gujarat, India

Keywords:

Patternless casting, Additive manufacturing, Sand Casting

Abstract

In casting industries with the development of technology there is need to cast complex and intricate parts very accurately in dimension and geometry with the good surface finish. after the development of additive manufacturing technologies the casting industries are able to improve casting by improving pattern making up to certain limit and also some special casting processes like investment casting becomes more easier because of direct manufacturing of wax pattern using 3D printers but due to different joints in complex component manufacturing industries and also automobile industries require Mechanical joint less casting. So, now it becomes necessary for casting industries to make direct mold without the use of pattern. Also, there is development in additive manufacturing technology in material compatibility. This paper reviews the Additive manufacturing technologies for growing patternless casting manufacturing.

References

  1. Wei-Yuan Dzan The Methodology of Patternless Casting Manufacturing International Journal Of Systems Applications, Engineering & Development Issue 4, Volume 5, 2011
  2. Munish Chhabra, Dr. Rupinder Singh, Experimental Investigation of Pattern-less Casting Solution Using Additive Manufacturing Technique, MIT International Journal of Mechanical Engineering Vol. 1, No. 1, Jan 2011, pp 16-24 ISSN No. 2230-7699 MIT Publications
  3. R. Pastircak, A. Sladek, and E. Kucharcikova, The Production of Plaster Molds with Patternless Process Technology, Archives of foundry engineering
  4. Nicholas A. Meisel, Christopher B. Williams, Alan Druschitz, Lightweight metal cellular structures via indirect 3d printing And casting.
  5. Ivan Stefanic, Pero Raos, Ivan Samardzic, Boris Tintor, and Edo Musser, Rapid prototyping of casting cores.
  6. Philip Hankey and Richard Wooldridge, optimisation of additive manufactured sand printed mould material for aluminium castings. 27th International Conference on Flexible Automation and Intelligent Manufacturing,FAIM2017, 27-30 June 2017, Modena, Italy
  7. N. I. S. Hussein, M. N. Ayof, and N. I. Mohamed Sokri, Mechanical Properties and Loss on Ignition of Phenolic and Furan Resin Bonded Sand Casting. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME) Volume 1, Issue 3 (2013) ISSN 2320-4052; EISSN 2320-4060.
  8. Chengyang DENG, Jinwu KANG, Haolong SHANGGUAN, Yongyi HU, Tao HUANG, and Zhiyong LIU Effects of Hollow Structures in Sand Mold Manufactured Using 3D Printing Technology.
  9. Prof. D.V. Mahindru & Prof. Priyanka Mahendru, Review of Rapid Prototyping-Technology for the Future.
  10. Himanshu Khandelwal, Dr. B. Ravi, 3D Printing Enabled Rapid Manufacture of Metal Parts at Low Cost.
  11. Dr. P. Nageswara Rao, Dr. Yury Lerner, Vladimir Kouznetsov, Rapid Prototyping Applications in Metal Casting.
  12. Aondona Paul Ihom, Aniekan Offiong, the Study of Green Compression Strength of a Green Sand Mould Using Statistical Approach.
  13. J.P.Kruth, X.Wang, T.Laoui and L. Froyen, Lasers and materials in selective laser sintering.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2018-04-30

Issue

Volume 4, Issue 5, March-April-2018

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Yashkumar Patel, Ankit Kahar, Dhaval Doshi, " Technical Review of Additive Manufacturing technique in Patternless Casting Manufacturing, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 4, Issue 5, pp.487-492, March-April-2018.