Tensile Bond Strength of Soft Liner to denture Base Resin Processed by two Commonly used Processing Techniques

Authors

  • Peta Harish  PG Scholar, Narayana Dental College and Hospital, Nellore, Andhra Pradesh, India
  • T. Pavan Kumar  Professor, Narayana Dental College and Hospital, Nellore, Andhra Pradesh, India
  • A. Avinash  PG Scholar, Narayana Dental College and Hospital, Nellore, Andhra Pradesh, India

DOI:

https://doi.org//10.32628/IJSRST196243

Keywords:

Soft Liner, Heat Cure Denture Base Resin, Tensile Bond Strength

Abstract

This study evaluated the effect of two commonly used methods of processing permanent soft liner on tensile bond strength between denture base and soft liner. Silicone based soft liner was used in this study. Ten heat cure dumbbell shaped specimens along with soft liner were processed together. Another ten heat cure dumbbell shaped specimens were fabricated and later relined with soft liner. All the specimens were subjected to tensile bond strength test. Specimens relined directly with soft liner at the time of processing the denture base resin showed significantly higher bond strength.

References

  1. Garcia LT, Jones JD. Soft Liners. Dent Clin N Am 2004;48;709-720
  2. Gundogdu M, Duymus ZY, Alkurt M. Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base. J Prosthet Dent 2014;1-8
  3. Akin H, Tugut F, Guney U, Kirmali O, Akar T. Tensile bond strength of silicone – based soft denture liner to two chemically different denture base resins after various surface treatments. Laser Med Sci 2013;28:119-123
  4. Madan N, Datta K. Evaluation of tensile bond strength of heat cure and autopolymerizing silicone –based resilient denture liners before and after thermocycling.Indian J Dent Res 2012;23:64-8
  5. Al-Saraj NA, Shehab MM, Al-Irhaym RN. Effect of different curing methods on tensile bond strength soft acrylic liner to heat cured acrylic resin. Al-Rafidain Dent J. 2011;11:292-296

International Journal of Scientific Research in Science and Technology

Downloads

Published

2019-04-30

Issue

Volume 6, Issue 2, March-April-2019

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Peta Harish, T. Pavan Kumar, A. Avinash, " Tensile Bond Strength of Soft Liner to denture Base Resin Processed by two Commonly used Processing Techniques, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 6, Issue 2, pp.267-270, March-April-2019. Available at doi : https://doi.org/10.32628/IJSRST196243