The study On Mechanical Properties of HDPE Hybrid Polymer based Hybrid Composites

Authors

  • Inchara C  PG Scholar, Mechanical Engg, UVCE, Bangalore University, Bengaluru, Karnataka, India.
  • Shantharaja M  Associate Professor, Mechanical Engg, UVCE, Bangalore University, Bengaluru, India
  • Yogesh Kumar K J  Assistant Professor, Mechanical Engg, MIT, VTU, Mysore, Karnataka, India

DOI:

https://doi.org/10.32628/IJSRST21861

Keywords:

HDPE, Hybrid Materials, Mechanical Properties

Abstract

Polymer and their composites are used in many engineering applications as an alternate of metals, because of the parameters such as low cost, light weight and durability. Hybridization is a process of mixing two or more similar or dissimilar materials. It increases the performance and efficiency. In this study investigation has been made on mechanical properties of HDPE polymer based hybrid composites fabricated from the effect of various synthetic fibers (SGF ,PTFE,SCF), synthetic fillers(Silica, hydroxyapatite, zirconia) by melt mixing method using twin screw extruder followed by injection molding technique. The mechanical properties of the samples such as tensile test, flexural test were measured by universal testing machine. And the impact test was performed on Izod impact testing machine. The results show that the tensile strength of hybrid composite TR-4 sample increases compared to other composites. Flexural strength of sample TR-6 shows highest flexural strength comparted to others. The impact strength increases when the filler materials 2% of zirconia and 2% of hydroxyapatite are added to composite material i.e. is TR-6 sample.

References

  1. Boon Peng Chang, Hazizan MD Akil, Ramdziah Md. Nasir, 2013, Mechanical and Tribological properties of Zeolite-reinforced UHMWPE Composite for Implant application, Procedia Engineering 68, pg 88-94
  2. Farizah Hamid, Suffiyana Akhbar, K.H Ku Halim, 2013,Mechanical and Thermal properties of Polyamide 6/HDPE-g-MAH/High Density Polyethylene, Procedia Engineering 68, pg 418-424.
  3. C. Riul, V. Tita, J.de. Carvalho, R.B.Canto, 2012,Processing and Mechanical properties evolution of glass fiber-reinforced PTFE laminates, Composite science and technology 72, pg 1451-1458.
  4. Chun Yan, Hangzhau Li, Xiaoqing Zhang, Yingdan Zha, Xingu Fan, Liping Yu, 2013, Preparation and properties of continuous glass fiber reinforced anionic polyamide-6 thermoplastic composites.
  5. B.V. Lingesh, B.M. Rudresh, B.N. Ravikumar, 2014, Effect of short glass fibers on mechanical properties of Polyamide66 and Polypropylene(PA66/PP) thermoplastic blend composites, Procedia material science 5, pg 1231-1240.
  6. Amit Mallik, Anil K Barik, Biswajit Pal, 2015, Comparative studies on physic-mechanical properties of composite material of low density Polyethylene and raw/Calcined Kaolin, Journal of Asian Ceramic Societies 3, pg 212-216.
  7. D.I. Chukova, A.A. Stepashkina, A.V. Maksimkina, V.V.Tcherdyntseva, S.D. Kaloshkina, K.V. Kuskova, V.I. Bugakovb, 2015, Investigation of structure, mechanical and tribological properties of short carbon fiber reinforced UHMWPE-matrix composites, Composites part B.
  8. Mariam A AlMaadeed, Ramazan Kahraman, P. Noorunnisa Khanam, Nabil Madi,2012, Date plam wood flour/glass fibre reinforced hybrid composite of recycled polypropylene: mechanical and thermal properties.
  9. S L Favaro, T. A. Ganzerli, A. G. V. de Carvalho Neto, O.R.R.F. da Silva, E.Radovanovic,2010; Chemical, Morphological and Mechanical analysis of sisal fiber-reinforced recycled high-density polyethylene composites, pg 465-473.
  10. Moayad N. Khalaf, Mechanical properties of high density polyethylene,2011.
  11. Jagannath Biwas, Hyun Kim Chai Suk Yim, Junghwan Cho, Geom Joong Kim, and Soonja Choe 2004, Structural Effects on the tensile and Morphological properties of Zeolite-filled Polypropylene Derivative composites, pg 443-450.
  12. Ji-Zhao Liang*1 , Quan-Quan Yang1,Effects of carbon fiber content and size on electric conductive properties of reinforced high density polyethylene composites, 1 April 2017, Pages 457-466
  13. Chao Hua , Xinwen Liaoa , Qing-Hua Qina,⁎ , Gang Wangb, The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibers
  14. Maryana Zagula-Yavorska, Jerzy Morgiel n , Jolanta Romanowska, Jan Sieniawski, Nanoparticles in zirconium-doped aluminide coatings
  15. B. Naveen Kumar Reddy a,⇑ , P. Kiran b, Effect of silver oxide on hydroxy carbonated apatite formation for simulated body fluid soaked calcium phospho silicate system
  16. A. Sampath Kumar, T. Himanshu, V. Vikashkumar, J. Shubham, S. Shyamkumar and SPS Ram pyare, Mater. Sci. Eng. C 49 (2015) 549–559.
  17. Keun-Hwan Oha , Insung Baea , Hongkyung Leeb , Hyuk Kima , Hee-Tak Kimb, Silica-embedded hydrogel nanofiller for enhancing low humidity proton conduction of a hydrocarbon-based polymer electrolyte membrane
  18. Harjeet S. Jaggi a , Yogesh Kumar a , Bhabani K. Satapathy a,⇑ , Alok R. Ray b , Amar Patnaik c, Analytical interpretations of structural and mechanical response of high density polyethylene/hydroxyapatite bio-composites, a Centre for Polymer Science and Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016, India b Centre for Biomedical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016, India c Mechanical Engineering Department, NIT Hamirpur 177 005, India
  19. C. Albanoa,∗ , R. Pererac , L. Catañob , A. Karamb , G. Gonzálezd,e, Prediction of mechanical properties of composites of HDPE/HA/EAA, a Universidad Central de Venezuela, Facultad de Ingeniería, Escuela de Ingeniería Química, Caracas, Venezuela b Laboratorio de Polímeros, Centro de Química, Instituto Venezolano de Investigaciones Científicas, Caracas, Venezuela c Departamento de Mecánica, Universidad Simón Bolívar, Valle de Sartenejas, Caracas, Venezuela d Lab. de Materiales, Centro de Ingeniería de Materiales y Nanotecnología, Instituto Venezolano de Investigaciones Científicas, Caracas, Venezuela e Escuela de Fisica, Facultad de Ciencias, Universidad Central de Venezuela, Caracas, Venezuela
  20. Nischal Kharel1, Abinash Kumar Adhikari2, Abinash Bajgain3, Devaraj.E4, Mechanical Properties of HDPE Reinforced with carbon fiber Powder with and without filler addition

Downloads

Published

2021-12-30

Issue

Section

Research Articles

How to Cite

[1]
Inchara C, Shantharaja M, Yogesh Kumar K J "The study On Mechanical Properties of HDPE Hybrid Polymer based Hybrid Composites" International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 8, Issue 6, pp.140-148, November-December-2021. Available at doi : https://doi.org/10.32628/IJSRST21861