PLC Based Automated Drilling Machine

Authors

  • P Pounraj  BE students,Department of Mechanical & Automation Engineering, PSN College Of Engineering & Technology, Tirunelveli, Tamil Nadu, India
  • S Balakrishnan  BE students,Department of Mechanical & Automation Engineering, PSN College Of Engineering & Technology, Tirunelveli, Tamil Nadu, India
  • Dr. A Krishnaraju  Professor, Department of Mechanical & Automation Engineering, PSN College Of Engineering & Technology, Tirunelveli, Tamil Nadu, India
  • V Ramkumar  Assistant Professor, Department of Mechanical & Automation Engineering, PSN College Of Engineering & Technology, Tirunelveli, Tamil Nadu, India

Keywords:

Abstract

Today most of the industries are trying to make improvement in their production processes as well as relevant machinery to improve the productivity along with the automation. Drilling, taping, boring etc. are such operations which are most frequently used in small and large scale industries. Most of the industries uses the conventional method says hand tapping drilling, boring. This conventional method is very time consuming process, less accurate and includes higher labour cost, and ultimately leads to less productivity. So there is a scope to develop the machine for various operation which would overcome all the problems faced by the conventional process. So we are going to develop the portable pneumatics machine which will make the use of compressed air for it operation less human involvement as which is used in hand tapping, drilling, boring.

References

  1. Mechatronics and Measurements Systems By: David g. Alciatore, Michael B.histand
  2. Mechatronics and Electrical Engineering By: W. Bolton
  3. Introduction to Robotics By Saeed B.Niku
  4. The 8051 Micro-controller Architecture, programming & Applications By: Kenneth j.Ayala
  5. Mechanism and Mechanic Theory By: J.S Rao, R.V.Dukkipati
  6. Practical transistor circuit design andanalusis-By: GERALD E. WILLIAMS
  7. Robotic D. Klafter, Thomas A. Chmiclewski, and Michael Negin
  8. Programming and Customizing the 8051 Micro-controller By;Myke Predko
  9. The concepts and Feature of Micro-controllers By; Raj Kamal
  10. Digital and Analog communication System By: K. Sam Shanmugam
  11. Raj Kamal- Microcontrollers Architecture, Programming, Interfacing and System Design.
  12. Mazidi- Embedded Systems.
  13. PCB Design Tutorial – David. L.Jones.
  14. PIC Microcontroller Manual – Microchip.
  15. Embedded C- Michael.J.Pont
  16. Mechatronics and Measurement Systems By: David g. Alciatore, Michael B. Histand
  17. Mechatronics – Electronic Control Systems in Mechanical and Electrical Engineering By: W. Bolton
  18. Introduction to Robotics By Saeed B Niku
  19. The 8051 Micro-controller Architecture, programming & Applications By: Kenneth J. Ayala
  20. Mechanism and Machine Theory By: J.S. Rao, R.V. Dukkipati
  21. Practical transistor circuit design and analysis-By: GERALD E. WILLIAMS
  22. Robotic Engineering An Integrat ed Approach By: Richard D. Klafter, Thomas A. Chmiclewski, and Michael Negin
  23. Programming and Customizing the 8051 Microcontroller By: Myke Predko
  24. The concepts and Features of Micro-controllers By: Raj Kamal
  25. Digital and Analog Communication System By: K Shanmugam
  26. Raj kamal – microcontrollers Architecture, Programming, Interfacing and System Design.
  27. Mazidi –Embedded Systems.
  28. PCB Design Tutorial – David.L.Jones.
  29. PIC Microcontroller Manual – Microchip.
  30. Embedded C –Michael.J.Pont

International Journal of Scientific Research in Science and Technology

Downloads

Published

2021-04-10

Issue

Volume 9, Issue 1, March-April-2021

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
P Pounraj, S Balakrishnan, Dr. A Krishnaraju, V Ramkumar, " PLC Based Automated Drilling Machine , International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 9, Issue 1, pp.789-793, March-April-2021.