Biochar Composite

Authors

  • Sanchu Varghese  BE Student, Department of Mechanical and Automation Engineering, PSN Collage of Engineering and Technology, Tirunelveli, Tamil Nadu, India
  • Sijo Saji  BE Student, Department of Mechanical and Automation Engineering, PSN Collage of Engineering and Technology, Tirunelveli, Tamil Nadu, India
  • V Ramkumar  Assistant Professor, Department of Mechanical and Automation Engineering, PSN Collage of Engineering and Technology, Tirunelveli, Tamil Nadu, India
  • V Manikandan  Principal, Department of Mechanical and Automation Engineering, PSN Collage of Engineering and Technology, Tirunelveli, Tamil Nadu, India

Keywords:

Biochar, Composite, Epoxy Resin, Mould

Abstract

Polymer composite has been used in a variety of application because of their many advantages such as relatively low cost of production, easy to fabricate and superior strength compared to neat polymer resin. Reinforcement in polymer is either syntenic or natural. The objective of the project work is to steady the physical and mechanical behaviour of biochar nano material based on epoxy matrix composite. The project focuses on the effect of differences in weight percentage of the nano material on the mechanical properties of the fabricated composites. The specimen is prepared with biochar obtained from rice husk and epoxy resin as a matrix in the polymer composite. The weight percentages were change and the moulding is done in a closed mould. The specimens were subjected to tensile strength, flexural strength and impact strength test and the failure of the composite was examined.

References

  1. Tiesong Lin, Dechang Jia, Meirong Wang, Peigang He, Defu Liang // Bull. Mater. Sci. 32 (1) (2009)77.
  2. Shao-Yun Fu, Bernd Lauke // Composites Science and Technology 56 (1996) 1179.
  3. G. Zak, M. Haberer, C.B. Park, B. Benhabib // Composites Science and Technology 60 (2000) 1763.
  4. Junzhi Zhang, Huating Liu, Yandong Zhu, Zhaoqi Fu, Jing Zhao // Advanced Materials Research 261-263 (2011) 407
  5. Weimin Li, Jinyu Xu // Materials Science and Engineering 505 (1-2) (2009) 178.
  6. J.L. Thomason, M.A. Vlug // Composites Part A: Applied Science and Manufacturing 28 (1997) 277.
  7. Xinrui Zhang, Xianqiang Pei, Qihua Wang // Journal of Applied Polymer Science 111 (2009) 2980.
  8. M. Botev, H. Betchev, D. Bikiaris, C. Panayiotou // Journal of Applied Polymer Science 74 (1999) 523.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2021-04-10

Issue

Volume 9, Issue 1, March-April-2021

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Sanchu Varghese, Sijo Saji, V Ramkumar, V Manikandan, " Biochar Composite , International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 9, Issue 1, pp.845-854, March-April-2021.