Fabrication of Electric Agriculture Cultivator

Authors

  • S. Noor Ahamed  Assistant professor, Department of Mechanical Engineering, Gates Institute of Technology, Andhra Pradesh, India
  • V. Anil Kumar Reddy  UG Scholar, Department of Mechanical Engineering, Gates Institute of Technology, Andhra Pradesh, India
  • B. Nagaraju  UG Scholar, Department of Mechanical Engineering, Gates Institute of Technology, Andhra Pradesh, India
  • K. Balu  UG Scholar, Department of Mechanical Engineering, Gates Institute of Technology, Andhra Pradesh, India
  • U. Mallikarjuna  UG Scholar, Department of Mechanical Engineering, Gates Institute of Technology, Andhra Pradesh, India
  • B. Jayakrishna  UG Scholar, Department of Mechanical Engineering, Gates Institute of Technology, Andhra Pradesh, India

DOI:

https://doi.org/10.32628/IJSRST229362

Keywords:

Efficiency, Machinery equipment, motor,No fuel consumption,Eco-Friendly,etc.

Abstract

Agriculture has been an integral part of the human ecosystem. However, traditional farming methods require a lot of human effort and are very time-consuming. Farm tilling is one of the most labor intensive operations in agriculture. Manual tiling of fields is very strenuous task while tractors incur high capital along with heavy fuel consumption costs. This low-cost portable battery charged electric power tiller machine is a one-stop modern solution to enhance the conventional agriculture methods of farming, as it reduces the human effort, at a very negligible price using motorized tilling mechanism. The electric power tiller helps reduce the time and cost involved in tilling using a smart portable design thereby increasing the productivity and efficiency in agriculture.

References

  1. D.A. Mada, Sunday Mahai, [2013] concluded that the importance of mechanizationin agricultural. The information from the paper was need of multifunctional forpre-andpost-harvesting.Wehavetakenthisasbaseforourresearchandfurtherproductionof our multifunctionalagriculturalcultivator.
  2. F.A. Adamu, B. G. Jahun and B. Babangida [2014]. In his paper authors draws ourattention towards the performance factor of a power tiller. Among those demand for lightweight power tiller was sought out most.Fuel efficiency and field capacity ofsuchparameters are also discussed. We take those points in consideration while designing asustainablemultifunctionalagricultural cultivator.
  3. Md. Aqib Naque, Akhtar Ali Rizvi [2013] this machine is developed to reduce thetimeandeffortrequiredforproductionuptothegreatextent.Also,thismachinemanufacturingcostislessascomparedtoother,byselectingabovetopicweareunderstand, familiar and know the details of agricultural technology, with the help of thismachine we are trying to reduce labour cost, time of a middle class and small sectorfarmers.
  4. KshirsagarPrashant, KuldipGhotane[2016] Inthispaperresearchitwillofsmallscalefarm.Byemployingthisinrealwillhelpinfasterrateofbowingand grasserupting.
  5. Biswas H S, [1990] Indian Institute of Technology, Kharagpur, India. 283p. In thisresearch paper, we got the method for selection of tool depends on moisture contents insoil.
  6. Dr.C.N.Sakhaleetal.(2016):Accordingtotheauthormultifunctional agricultural machine mainly focuses on basicproblems faced by our fellow farmers i.e., seed sowing,cultivationanddigging.Cultivationtoolisremovable.Thisoperationisdonebymanualforce.In our machine thecultivation tool i.e., the tiller will be removable for the ease oftransportation purpose and also the operation can be carriedoutby manualforce.
  7. Mr. Thange R.B, Mr. Ugale A.G et al. (2016):The authorstudied and developed agricultural needs to find new ways toimproveefficiency.Oneapproachistoutilizeavailableinformationtechnologiesintheformofmoreintelligentmachines to reduce and target energy inputs in more effectiveways than in the past. Here author is trying to make such anequipment that will perform no. of operations like sowing,weeding, grass cutting, tillage,etc.Thedrawbacks in the existing machine are rectified successfully inourmachine.
  8. Amol Nalawade, Akash L. Kundu et al. (2019):The authorpresented the information about the different innovations doneinseedingmachinesavailableforfarmingandplantationpurpose. In this the main aim of seed sowing operation is toputtheseedinrowsandatdesireddepthandhavingaparticular spacing between seed to seed with soil and providesa proper exertion of a force over the seed. So, it shows properrow spacing within the seeds, their seed rate and their depthassociated with different agro-climatic conditions to achieveoptimum yields. Our equipment consists of a low maintenancecost which does not consist of a fine texture which can beeasilybroken or damaged.
  9. Nagesh Adalinge, Rahul Mane et al. (2017):Here the authorhasproposed that seedsowingmachineisa device whichhelpsinsowingofseedsinthedesiredpositionhenceassisting the farmers in saving time. When the equipment ispushed forward by using handles, the front wheel rotates andthe gear is mounted on the axle of the wheel start to rotate anditsrotationisthentransferredtothepinionthroughchaindrive.Therotarymotionofpinionisconvertedintoreciprocatingmotionbysimpleslidercrankmechanism.
  10. Pradip Gunawat, Vinayak Yadav et al. (2017):The authorproposed that the objectives of seed planter machine are to putseedsatdesireddepthwithconstantseedspacingandcoveringtheseedwithsoil.Ourmachineissuitableforplanting seed in ridge and furrow method, flat arrow method,flat bed method as well as multi cropping. The main objectiveof our machine is to reduce human effort and back ache offarmers. Tooth Bevel gear is used to convert rotational motionintoLinear.Dibberisusedtostirthesoiltovariousdepths.

International Journal of Scientific Research in Science and Technology

Downloads

Published

2022-06-30

Issue

Volume 9, Issue 3, May-June-2022

Section

Research Articles

License

Copyright (c) IJSRST

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
S. Noor Ahamed, V. Anil Kumar Reddy, B. Nagaraju, K. Balu, U. Mallikarjuna, B. Jayakrishna "Fabrication of Electric Agriculture Cultivator" International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011,Volume 9, Issue 3, pp.513-519, May-June-2022. Available at doi : https://doi.org/10.32628/IJSRST229362