Process Hazard Analysis of Process Industries
Keywords:
PHA,HAZID ,HAZOP, QRA, Risk Management, Process Safety Management.Abstract
Process Hazard Analysis (PHA) and Risk Assessment Techniques are the key factors in the industrial safety. The Process safety management permits the utilization of various analysis techniques and elimination or mitigation of the various hazards in process industries. Hazard Identification (HAZID) helps in defining all possible hazardous events, through which one can be prepared for probable solutions beforehand. Hazard and Operability (HAZOP) study is the main technique for analyzing various hazards that can occur in industry. Of various types of HAZOP methodology, deviation by deviation methodology will be adopted for this particular thesis. The following research article is intended to conduct the HAZOP study of the chemical plants and present the outcomes. QRA is a quantitative risk assessment model widely used worldwide for risk assessment methods to estimate and then score numerical estimates of the level of risk associated with a specific activity or set of activities.
References
- Kim, K.; Kang, H.; Kim, Y. Risk Assessment for Natural Gas Hydrate Carriers: A Hazard Identification (HAZID) Study. Energies 2015, 8 (4),3142–3164. https://doi.org/10.3390/en8043142
- Hazard Identification and Analysis in Work Areas within the Manufacturing Sector through the HAZID Methodology. Process Safety and Environmental Protection 2021, 145,23–38. https://doi.org/10.1016/j.psep.2020.07.049.
- Cameron, I.; Mannan, S.; Németh, E.; Park, S.; Pasman, H.; Rogers, W.; Seligmann, B. Process Hazard Analysis, Hazard Identification and Scenario Protection 2017, 110, 53–70. https://doi.org/10.1016/j.psep.2017.01.025.
- Lucena, A. F. E.; Saffaro, F. A. Guidelines for Exploring Construction Sites in Virtual Reality Environments for Hazard Identification. International Journal of Occupational Safety and Ergonomics 2020, 1–10. https://doi.org/10.1080/10803548.2020.1728951.
- Reyes-Calderón, A.; Pérez-Uribe, S.; Ramos-Delgado, A. G.; Ramalingam, S.; Oza, G.; Parra- Saldívar, R.; Ramirez-Mendoza, R. A.; Iqbal, H. M. N.; Sharma, A. Analytical and Regulatory Considerations to Mitigate Highly Hazardous Toxins from Environmental Matrices. Journal of Hazardous Materials 2022, 423, 127031. https://doi.org/10.1016/j.jhazmat.2021.127031.
- Aven, T. Risk Assessment and Risk Management: Review of Recent Advances on Their Foundation. European Journal of Operational Research 2016, 253(1),1–13. https://doi.org/10.1016/j.ejor.2015.12.023.
- Nguyen, H.-T.; Safder, U.; Kim, J.; Heo, S.; Yoo, C. An Adaptive Safety-Risk Mitigation Plan at Process-Level for Sustainable Production in Chemical Industries: An Integrated Fuzzy-HAZOP- Best-Worst Approach .Journal of Cleaner Production 2022, 339,130780.
- https://doi.org/10.1016/j.jclepro.2022.130780.
- Aqlan, F.; Mustafa Ali, E. Integrating Lean Principles and Fuzzy Bow-Tie Analysis for Risk Assessment in Chemical Industry. Journal of Loss Prevention in the Process Industries 2014, 29, 39–48. https://doi.org/10.1016/j.jlp.2014.01.006.
- Khan, F. I.; Abbasi, S. A. Multivariate Hazard Identification and Ranking System. Process Safety Progress 1998, 17 (3), 157–170. https://doi.org/10.1002/prs.680170303.
- Catino, C. A.; Ungar, L. H. Model-Based Approach to Automated Hazard Identification of Chemical Plants. AIChE Journal 1995, 41 (1), 97–109. https://doi.org/10.1002/aic.690410110
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST
This work is licensed under a Creative Commons Attribution 4.0 International License.