Synthesis of Ferric Oxide Urea Formaldehyde Nanocomposite for Adsorptive Removal of Malachite Green Cationic Dye from Aqueous Media

Prapti P. Warbhe; Rakesh M. Naktode; Mamta R. Lanjewar

doi:10.32628/IJSRST2411350

Authors

Prapti P. Warbhe Department of Chemistry, Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur, Maharashtra, India Author
Rakesh M. Naktode Dada Ramchand Bakharu Sindhu Mahavidyalaya, Nagpur, Maharashtra, India Author
Mamta R. Lanjewar Department of Chemistry, Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur, Maharashtra, India Author

DOI:

https://doi.org/10.32628/IJSRST2411350

Keywords:

Ferric Oxide, Ferric Oxide-UF, Malachite Green, Langmuir Isotherm, Pseudo Second Order

Abstract

The main objective of current research is to synthesise ferric oxide nanoparticles and prepare their nanocomposite from urea formaldehyde resin. Characterization techniques such as FTIR, XRD, and FESEM-EDX were used to obtain the specifications of the synthesised nanoparticle. Synthesised ferric oxide urea formaldehyde nanocomposite was used for the adsorption of malachite green (MG) dye from wastewater. The adsorption tests were implemented at various parameters. The adsorption capacity could reach 98% within a contact time of 80 min at pH 7 and an initial dye concentration of 50 ppm. It was finally retained that the adsorption rate of malachite green dye by ferric oxide urea formaldehyde nanocomposite follows pseudo second-order kinetics with the adsorption isotherm fitted by the Langmuir isotherm model well. All the above results demonstrated that ferric oxide urea formaldehyde nanocomposite has a significant potential for the removal of malachite green dye from wastewater.

Downloads

Download data is not yet available.

References

N. Pandey, S. K. Shukla, and N. B. Singh, ‘Zinc oxide-urea formaldehyde nanocomposite film as low-cost adsorbent for removal of Cu(II) from aqueous solution’, Adv Mater Lett, vol. 6, no. 2, pp. 172–178, 2015, doi: 10.5185/amlett.2014.5604. DOI: https://doi.org/10.5185/amlett.2014.5604

T. Bora and J. Dutta, ‘Applications of nanotechnology in wastewater treatment-A review’, Journal of Nanoscience and Nanotechnology, vol. 14, no. 1. pp. 613–626, Jan. 2014. doi: 10.1166/jnn.2014.8898. DOI: https://doi.org/10.1166/jnn.2014.8898

B. Zhao, W. Xiao, Y. Shang, H. Zhu, and R. Han, ‘Adsorption of light green anionic dye using cationic surfactant-modified peanut husk in batch mode’, Arabian Journal of Chemistry, vol. 10, pp. S3595–S3602, May 2017, doi: 10.1016/j.arabjc.2014.03.010. DOI: https://doi.org/10.1016/j.arabjc.2014.03.010

N. M. Mahmoodi and F. Najafi, ‘Preparation of surface modified zinc oxide nanoparticle with high capacity dye removal ability’, Mater Res Bull, vol. 47, no. 7, pp. 1800–1809, Jul. 2012, doi: 10.1016/j.materresbull.2012.03.026. DOI: https://doi.org/10.1016/j.materresbull.2012.03.026

S. J. Tesh and T. B. Scott, ‘Nano‐Composites for Water Remediation: A Review’, Advanced Materials, vol. 26, no. 35, pp. 6056–6068, Sep. 2014, doi: 10.1002/adma.201401376. DOI: https://doi.org/10.1002/adma.201401376

Z. N. Kayani, S. Arshad, S. Riaz, and S. Naseem, ‘Synthesis of Iron Oxide Nanoparticles by Sol–Gel Technique and Their Characterization’, IEEE Trans Magn, vol. 50, no. 8, pp. 1–4, Aug. 2014, doi: 10.1109/TMAG.2014.2313763. DOI: https://doi.org/10.1109/TMAG.2014.2313763

M. Yazdanbakhsh, I. Khosravi, E. K. Goharshadi, and A. Youssefi, ‘Fabrication of nanospinel ZnCr2O4 using sol-gel method and its application on removal of azo dye from aqueous solution’, J Hazard Mater, vol. 184, no. 1–3, pp. 684–689, Dec. 2010, doi: 10.1016/j.jhazmat.2010.08.092. DOI: https://doi.org/10.1016/j.jhazmat.2010.08.092

J. Mohanta, B. Dey, and S. Dey, ‘Magnetic Cobalt Oxide Nanoparticles: Sucrose-Assisted Self-Sustained Combustion Synthesis, Characterization, and Efficient Removal of Malachite Green from Water’, J Chem Eng Data, vol. 65, no. 5, pp. 2819–2829, May 2020, doi: 10.1021/acs.jced.0c00131. DOI: https://doi.org/10.1021/acs.jced.0c00131

A. Soni, A. Tiwari, and A. K. Bajpai, ‘Removal of Malachite green from aqueous solution using nano-iron oxide-loaded alginate microspheres: Batch and column studies’, Research on Chemical Intermediates, vol. 40, no. 3, pp. 913–930, 2014, doi: 10.1007/s11164-012-1011-1. DOI: https://doi.org/10.1007/s11164-012-1011-1

A. Moumen et al., ‘Removal of Malachite Green Dye from Aqueous Solution by Catalytic Wet Oxidation Technique Using Ni/Kaolin as Catalyst’, Molecules, vol. 27, no. 21, p. 7528, Nov. 2022, doi: 10.3390/molecules27217528. DOI: https://doi.org/10.3390/molecules27217528

A. Q. Alorabi, ‘Effective Removal of Malachite Green from Aqueous Solutions Using Magnetic Nanocomposite: Synthesis, Characterization, and Equilibrium Study’, Adsorption Science & Technology, vol. 2021, Jan. 2021, doi: 10.1155/2021/2359110. DOI: https://doi.org/10.1155/2021/2359110

K. Tewari, G. Singhal, and R. K. Arya, ‘Adsorption removal of malachite green dye from aqueous solution’, Reviews in Chemical Engineering, vol. 34, no. 3, pp. 427–453, Apr. 2018, doi: 10.1515/revce-2016-0041. DOI: https://doi.org/10.1515/revce-2016-0041

N. Jain, M. K. Dwivedi, R. Agarwal, and P. Sharma, ‘Removal of Malachite Green from Aqueous Solution by Zeolite-Iron Oxide Magnetic Nanocomposite’, IOSR Journal of Environmental Science, vol. 9, no. 6, pp. 42–50, 2015, doi: 10.9790/2402-09614250.

A. Mohammadi, H. Daemi, and M. Barikani, ‘Fast removal of malachite green dye using novel superparamagnetic sodium alginate-coated Fe3O4 nanoparticles’, Int J Biol Macromol, vol. 69, pp. 447–455, Aug. 2014, doi: 10.1016/j.ijbiomac.2014.05.042. DOI: https://doi.org/10.1016/j.ijbiomac.2014.05.042

M. Nekoeinia et al., ‘FAST REMOVAL OF MALACHITE GREEN FROM AQUEOUS SOLUTIONS USING HIGHLY HYDROPHOBIC WATER.DISPERSIBLE MAGNETIC NANOCOMPOSITE’, Environ Eng Manag J, vol. 19, no. 7, pp. 1079–1095, 2019, doi: 10.30638/eemj.2020.102. DOI: https://doi.org/10.30638/eemj.2020.102

D. A. S. Costa, R. V. Mambrini, L. E. Fernandez-Outon, W. A. A. Macedo, and F. C. C. Moura, ‘Magnetic adsorbent based on cobalt core nanoparticles coated with carbon filaments and nanotubes produced by chemical vapor deposition with ethanol’, Chemical Engineering Journal, vol. 229, pp. 35–41, Aug. 2013, doi: 10.1016/j.cej.2013.05.099. DOI: https://doi.org/10.1016/j.cej.2013.05.099

N. P. Bhagya et al., ‘Adsorption of hazardous cationic dye onto the combustion derived SrTiO 3 nanoparticles: Kinetic and isotherm studies’, Journal of Asian Ceramic Societies, vol. 4, no. 1, pp. 68–74, Mar. 2016, doi: 10.1016/j.jascer.2015.11.005. DOI: https://doi.org/10.1016/j.jascer.2015.11.005