Bioplastic from Corn Starch; Characteristic and Biodegradable Performance

Pradip K. Wankhade; Fsaha Ahmad; Dhanshree Joshi; Neha Kale

doi:10.32628/IJSRST2512122

Authors

Pradip K. Wankhade Department of Chemical Technology, SGB Amravati University, Amravati, Maharashtra, India Author
Fsaha Ahmad Department of Chemical Technology, SGB Amravati University, Amravati, Maharashtra, India Author
Dhanshree Joshi Department of Chemical Technology, SGB Amravati University, Amravati, Maharashtra, India Author
Neha Kale Department of Chemical Technology, SGB Amravati University, Amravati, Maharashtra, India Author

DOI:

https://doi.org/10.32628/IJSRST2512122

Keywords:

Biodegradation, packaging, natural fibre, strength

Abstract

For food packaging plastics are generally used. Raw materials having good mechanical properties, cheap, lightweight and simple in the manufacturing process are used for polymers and plastics. Whereas the many plastics are not easily biodegradable. Therefore, innovators and other communities are worried to overcome the problems occurring due to non-biodegradable plastics which is making an adverse effect on the environment, so the more emphasis is given to produce the biodegradable plastic for day to day needs use. So, bioplastics are the mostly demanded and required entity because they are generally biodegradable, and using natural resources and will reduce the environmental pollution. To manufacture bioplastic starch-based material is mostly used. Due to it added natural fibres increases the strength of bioplastic and better degradation process of the bioplastic in soil. The additional properties of bioplastic like, tensile strength, stiffness, capacity to be used for purposes are the more advantageous. In this paper process of corn starch bioplastic, its characteristic study and its better possibilities of degradation due to corn starch biodegradable plastic with natural fibre are described. Which will give the scope in future to innovative ideas for material component as a natural fibre for bioplastic manufacturing.

Downloads

Download data is not yet available.

References

Heincke DG, Martinez I, Standing M, Gallegos C, Partal P (2017) Improvement of mechanical and water absorption properties of plant protein based bioplastics. Food Hydrocoll 73:21–29 DOI: https://doi.org/10.1016/j.foodhyd.2017.06.022

Navina R, Sharma S, Gupta A, Alashwal BY (2018) Keratin based bioplastic film from chicken feathers and its characterization. Int J Biol Macromol111:352–358 DOI: https://doi.org/10.1016/j.ijbiomac.2018.01.037

Geyer R, Jambeck JR, Law KL (2017) Production, use, and fate of all plastics ever. Sci Adv 3(7):E1700782 DOI: https://doi.org/10.1126/sciadv.1700782

Amni C, Ismet, ApriliaMariana S, Akbar SA (2020) Mechanical properties of bioplastics janeng starch (Dioscorea hispida) film with glycerol and zinc oxide as reinforcement. Rasayan J Chem 13(1):275–281 DOI: https://doi.org/10.31788/RJC.2020.1315492

Karan H, Funk C, Grabert M, Oey M, Hankamer B (2018) Review green bioplastics as part of a circular bioeconomy. Trends Plant Sci 24(3):237 DOI: https://doi.org/10.1016/j.tplants.2018.11.010

Arifa S, Tahir A, Mahmood A, Tabinda AB, Yasar A, Pugazhendhi A (2020) A review on environmental significance carbon foot prints of starch based bio-plastic: a substitute of conventional plastics. Biocatal Agric Biotechnol 27:101540 DOI: https://doi.org/10.1016/j.bcab.2020.101540

Zhang R, Wang X, Cheng M (2018) Preparation and characterization of potato starch film with various size of nano-SiO2. Polymers 10(10):1172 DOI: https://doi.org/10.3390/polym10101172

Bergel BF, da Luz LM, Santana RMC (2017) Comparative study of the influence of chitosan as coating of thermoplastic starch foam from potato, cassava and corn starch. Prog Org Coat 106:27–32 DOI: https://doi.org/10.1016/j.porgcoat.2017.02.010

Podshivalov A, Zakharova M, Glazacheva E, Uspenskaya M (2017) Gelatin/ potato starch edible biocomposite films: correlation between morphology and physical properties. Carbohydr Polym157:1162–1172 DOI: https://doi.org/10.1016/j.carbpol.2016.10.079

Luchese CL, Spada JC, Tessaro IC (2017) Starch content affects physicochemical properties of corn and cassava starch-based films. Ind Crops Prod 109:619–626 DOI: https://doi.org/10.1016/j.indcrop.2017.09.020

Domene-Lopez D, Delgado-Marin JJ, Martin-Gullon I, Garcia- Quesada JC, Montalban MG (2019) Comparative study on properties of starch films obtained from potato, corn and wheat using 1-ethyl-3-methylimidazolium acetate as plasticizer. Int J Biol Macromol 135:845–854 DOI: https://doi.org/10.1016/j.ijbiomac.2019.06.004

Santana RF, Bonomo RCF, Gandolfi ORR, Rodrigues LB, Santos LS, dos Santos Pires AC (2018) Characterization of starchbased bioplastics from jackfruit seed plasticized with glycerol. J Food Sci Technol 55(1):278–286 DOI: https://doi.org/10.1007/s13197-017-2936-6

Prakashkumar N, Ramalingam T, Thajuddin N, Shanmuganathan R, Pugazhendhi A, Natarajan S (2020) Polyherbal drug loaded starch nanoparticles as promising drug delivery system: antimicrobial antibiofilm and neuroprotective studies. Proces Biochem92:355–364 DOI: https://doi.org/10.1016/j.procbio.2020.01.026

Kant BS, Otari SV, Jong-MinJeon RG, Choi Y-K, Bhatia RK, Pugazhendhi A, Vinod Kumar J, Banu R, Yoon J-J, Kwon- YoungChoi Y-H (2021) Biowaste-to-bioplastic (polyhydroxyalkanoates): CONVERSION TECHNOLOGIES, STRATEGIES, CHALLENGES AND PERSPEctive. Biores Technol 326:124733 DOI: https://doi.org/10.1016/j.biortech.2021.124733

Zhang CW, Li FY, Li JF, Wang LM, Xie Q, Xu J, Chen S (2017) A New biodegradable composite with open cell by combining modified starch and plant fibers. Mater Des 120:222–229 DOI: https://doi.org/10.1016/j.matdes.2017.02.027

Yiu Fai Tsang, Vanish Kumar, Pallabi Samadar, Yi Yang, Jechan Lee, Yong Sik Ok, Hocheol Song, Ki-Hyun Kim, Eilhann E. Kwon, Young Jae Jeon; Production of bioplastic through food waste valorization; Elsevier Environment International 127 (2019) 625–6444 DOI: https://doi.org/10.1016/j.envint.2019.03.076