Analysis of Mechanical Properties of Steel and Glass Fibre Concrete Compared to Standard Concrete: An Experimental Approach

Authors

  • Chanchal Nagraj M.Tech. Scholar, Department of Civil Engineering, Jhada Sirha Government Engineering College Jagdalpur, Bastar, Chhattisgarh, India Author
  • Dr. A. K. Dubey Professor and Principal, Department of Civil Engineering, Jhada Sirha Government Engineering College Jagdalpur, Bastar, Chhattisgarh, India Author
  • Abhijeet Yadav Assistant Professor, Department of Civil Engineering, Rungta International Skill University Bhilai, Chhattisgarh, India Author

DOI:

https://doi.org/10.32628/IJSRST251265

Keywords:

Conventional concrete, Design mix concrete, Mechanical properties of concrete, Steel fibre, glass fibre

Abstract

This work investigates the use of steel and glass fibre as a to improve concrete mechanical qualities and to discovered that the use of fibre boosts concrete strength, particularly during early curing. Concrete constructions often fail due to cracks, which shorten their lifespan nowadays, additional chemicals or additives are utilized, such as steel and glass fibre. Concrete life is a major issue in the construction industry, with cracks causing issues the investigation of substitute reinforcing fibers to improve the mechanical qualities of concrete has been spurred by the rising demand for environmentally friendly building materials. In comparison to normal concrete, this experiment examines the performance of steel fiber-reinforced concrete (SFRC), glass fiber-reinforced concrete (GFRC), and a combination of steel and glass fiber concrete. Compressive, tensile, and flexural strengths were assessed through experimental investigation and glass fibers were added as an environmentally friendly substitute by 4% and 8% while steel fibers—known for their excellent tensile qualities—were also added at rates of 4%, and 8% by partial replacement of cement. According to the results, SFRC has better mechanical qualities and greatly increases tensile and flexural strengths. GFRC, on the other hand, showed promise as a long-lasting and reasonably priced reinforcement by exhibiting a moderate improvement in performance. This experimental data on the mechanical performance of steel and glass fibre-reinforced concrete under compression, tensile split, and flexure tests.

Downloads

Download data is not yet available.

References

IS 10262:2019 Recommended Guidelines for Concrete Mix Design Bureau of Indian standard New Delhi.IS 383:1970 Code for fine and coarse aggregate for concrete.

Indian Standard code 456:2000 of practice for general structural use of plain and reinforced concrete.

Concrete Technology: Theory and Practice by M. L Gambhir.

Concrete Technology: by S.S. Bhavikatti.

Bureau of Indian Standards IS 516: 1959 Methods of Tests for Strength of Concrete.

Li Wang, Ning Sun, Honghu Tang and Wei Sun. “A Review on Comprehensive Utilization of Red Mud and Prospect Analysis”.

Bai, J., Sabir, B. B., Wild, S., & Kinuthia, J. M. (2000). Strength development in concrete incorporating PFA and metakaolin. Magazine of Concrete Research, 52(3), 153-162. DOI: https://doi.org/10.1680/macr.2000.52.3.153

Dinakar, P., Sahoo, P. K., & Sriram, G. (2013). Effect of metakaolin content on the properties of high strength concrete. International Journal of Computer Science and Mathematics, 7(3), 215-223. DOI: https://doi.org/10.1007/s40069-013-0045-0

El-Din, H. K. S., Eisa, A. S., Aziz, B. H. A., & Ibrahim, A. (2017). Mechanical performance of high strength concrete made from high volume of metakaolin and hybrid fibers. Concrete and Building Materials, 140, 203-209.

Guneyisi, E., Gesoglu, M., & Mermerdas, K. (2007). Improving strength, drying shrinkage and pore structure of concrete using metakaolin. Materials and Structures, 41(5), 937-949.

John, N. (2013). Strength properties of metakaolin admixed concrete. International Journal of Scientific and Research Publications, 3(6), 1-7.

Katkhuda, H., Hanayneh, B., & Shatarat, N. (2009). Influence of silica fume on high strength lightweight concrete. International Scholarly and Scientific Research and Innovation, 3(10), 407-414.

Kumar, A. V. S. S., & Rao, K. (2014). A study on strength of concrete with partial replacement of cement with quarry dust and metakaolin. International Journal of Innovative Research in Science and Technology, 3(3), 10467-10473.

E. Furlani, S. Maschio, M. Magnan, E. Aneggi, F. Andreatta, M. Lekka, A. Lanzutti, L. Fedrizzi, Synthesis and characterization of geopolymers containing blends of unprocessed steel slag and metakaolin: The role of slag particle size, Ceram. Int. 44 (2018) 5226–5232. DOI: https://doi.org/10.1016/j.ceramint.2017.12.131

Y. Biskri, D. Achoura, N. Chelghoum, M. Mouret, Mechanical and durability characteristics of high-performance concrete containing steel slag and crystalized slag as aggregates, Constr. Build. Mater.150 (2017) 167–178. DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.083

C.S. Jiang, Q.J. Ding, F.Z. Wang, C. Li. Physical and chemical properties of steel slag and developing tend of comprehensive utilization technology, Sci. Technol. Over. Build. Mater. 23 (3) (2002) 3–5.

Ranjbar N, Mehrali M, Mehrali M, Alengaram UJ, Jumaat MZ.High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber[J]. Construction and building materials. 2016. 112. 629-38. DOI: https://doi.org/10.1016/j.conbuildmat.2016.02.228

B. Yan, P. Duan, D. Ren, Mechanical strength, surface abrasion resistance and microstructure of fly ash-metakaolin-sepiolite geopolymer composites[J], Ceramics International. 43 (1) (2017) 1052–1060. DOI: https://doi.org/10.1016/j.ceramint.2016.10.039

Khatib JM, Wild S. Pore size distribution of metakaolin paste. Cement Concrete Res 1996; 26:1545–53. DOI: https://doi.org/10.1016/0008-8846(96)00147-0

Frias M, Cabrera J. Pore size distribution and degree of hydration of metakaolin-cement pastes. Cement Concrete Res 2000;30: 561–9. DOI: https://doi.org/10.1016/S0008-8846(00)00203-9

Khatib JM, Wild S. Sulfate resistance of metakaolin mortar Cement Concrete Res 1998;28:83–92. DOI: https://doi.org/10.1016/S0008-8846(97)00210-X

Wild S, Khatib JM. Portlandite consumption in metakaolin cement pastes and mortars. Cement Concrete Res 1997;27(No. 1):127–46. DOI: https://doi.org/10.1016/S0008-8846(96)00187-1

Sabir BB, Wild S, Bai J. Metakaolin and calcined clays as pozzolans for concrete: a review. Cement Concrete Comp 2001; 23:441–54. DOI: https://doi.org/10.1016/S0958-9465(00)00092-5

Coleman NJ, Page CL. Aspects of the pore solution chemistry of hydrated cement pastes containing metakaolin. Cement Concrete Res 1997;27(1):147–54. DOI: https://doi.org/10.1016/S0008-8846(96)00184-6

Asbridge AH, Walters GV, Jones TR. Ternary blended concretes- OPC/ggbfs/Metakaolin. In: Concrete across borders. Odense, Denmark; June 1994.

Q. Wang, P. Yan, Hydration properties of basic oxygen furnace steel slag, Constr. Build. Mater. 24 (2010) 1134–1140. [42] DOI: https://doi.org/10.1016/j.conbuildmat.2009.12.028

Q. Wang, J. Yang, P. Yan, Influence of initial alkalinity on the hydration of steel slag, Science China-Technol. Sci. 55 (2012) 3378–3387. DOI: https://doi.org/10.1007/s11431-012-4830-9

Keke Sun, Xiaoqin Peng, S.H. Chu b, Shuping Wang a, Lu Zeng a, Guang Xiang Ji a “Utilization of BOF steel slag aggregate in metakaolin-based geopolymer”.

El-Din, H. K. S., Eisa, A. S., Aziz, B. H. A., & Ibrahim, A. (2017). Mechanical performance of high strength concrete made from high volume of metakaolin and hybrid fibers. Concrete and Building Materials, 140, 203-209. DOI: https://doi.org/10.1016/j.conbuildmat.2017.02.118

Guneyisi, E., Gesoglu, M., & Mermerdas, K. (2007). Improving strength, drying shrinkage and pore structure of concrete using metakaolin. Materials and Structures, 41(5), 937-949. DOI: https://doi.org/10.1617/s11527-007-9296-z

Nadeem, A., Memon, S. A., & Lo, T. Y. (2014). The performance of fly ash and Metakaolin concrete at elevated temperatures. Construction and Building Materials, 62, 67-76. DOI: https://doi.org/10.1016/j.conbuildmat.2014.02.073

Poon, C. S., Lam, L., Kou, S. C., Wong, Y. L., & Wong, R. (2001). Rate of pozzolanic reaction of metakaolin in high-performance cement pastes. Cement and Concrete Research, 31(9), 1301-1306. DOI: https://doi.org/10.1016/S0008-8846(01)00581-6

Wild, S., Khatib, J. M., & Jones, A. (1996). Relative strength, Pozzolanic activity and cement hydration in super plasticized metakaolin concrete. Cement and Concrete Research, 26(10), 1537-1544.

Kim HS, Lee SH, Moon HY. Strength properties and durability aspects of high strength concrete using Korean metakaolin. Construction Build Mater 2007; 21:1229–37. DOI: https://doi.org/10.1016/j.conbuildmat.2006.05.007

Wild S, Khatip JM, Jones A. Relative strength, pozzolanic activity and cement hydration in super plasticized metakaolin concrete. Cem Concrete Res 1996; 26:1537–44. DOI: https://doi.org/10.1016/0008-8846(96)00148-2

Downloads

Published

07-07-2025

Issue

Section

Research Articles