Synthesis of CuO via Sol-gel method and preparation of its Urea formaldehyde Nanocomposite

Rakesh M. Naktode; Prapti P. Warbhe; Mamata R. Lanjewar

doi:10.32628/IJSRST52411230

Authors

Rakesh M. Naktode Dada Ramchand Bakhru Sindhu Mahavidyalaya. Nagpur, Maharashtra, India Author
Prapti P. Warbhe Department of Chemistry RTMNU Nagpur University, Nagpur, Maharashtra, India Author
Mamata R. Lanjewar Department of Chemistry RTMNU Nagpur University, Nagpur, Maharashtra, India Author

DOI:

https://doi.org/10.32628/IJSRST52411230

Keywords:

Nanoparticle, Nanocomposites, CuO, CuO-UF

Abstract

The current work mainly deals with the development of new method of synthesis of CuO nanoparticles by using Sol-gel method. The obtained CuO was encapsulated in urea-formaldehyde (UF) resin by acid catalysed polymerization process. The characterization of CuO and CuO-UF made by Infra red spectroscopy (FT-IR), X- ray diffraction (XRD) and Field emission scanning electron microscopy (FESEM). FT-IR data gives the information of nature of bonds present in metal oxide CuO and on CuO-UF. Crystalline size of CuO nanoparticle calculated using Debye-Scherer formula found to be 24 nm. SEM and EDX analysis gives the diameter of particles and its elemental composition. From the interpretation of characterization data synthesis of CuO and nanocomposite of CuO-UF is confirmed.

Downloads

Download data is not yet available.

References

S. A. Corr, “Metal oxide nanoparticles,” pp. 180–207, 2013, doi: 10.1039/9781849734844-00180.

Q. Zhang, K. Zhang, D. Xu, G. Yang, and H. Huang, “Progress in Materials Science CuO nanostructures : Synthesis , characterization , growth mechanisms , fundamental properties , and applications,” Prog. Mater. Sci., vol. 60, no. October 2013, pp. 208–337, 2014, doi: 10.1016/j.pmatsci.2013.09.003.

S. R. V. S. Prasanna, K. Balaji, S. Pandey, and S. Rana, Metal Oxide Based Nanomaterials and Their Polymer Nanocomposites. Elsevier Inc., 2019. doi: 10.1016/B978-0-12-814615-6.00004-7.

T. H. Tran and V. T. Nguyen, “Copper Oxide Nanomaterials Prepared by Solution Methods , Some Properties , and Potential Applications : A Brief Review,” vol. 2014, 2014.

S. Singh et al., “Synthesis of CuO nanoparticles by precipitation method using different precursors,” Indian J. Eng. Mater. Sci., vol. 2, no. 1, pp. 740–745, 2021, doi: 10.1016/j.egypro.2013.06.808.

K. Nam et al., “Preparation of novel polymer – metal oxide nanocomposites with nanophase separated hierarchical structure,” vol. 34, no. 7, pp. 1289–1296, 2011.

Y. Cudennec and A. Lecerf, “The transformation of Cu(OH)2 into CuO, revisited,” Solid State Sci., vol. 5, no. 11–12, pp. 1471–1474, 2003, doi: 10.1016/j.solidstatesciences.2003.09.009.

M. Patel, S. Mishra, R. Verma, and D. Shikha, “Synthesis of ZnO and CuO nanoparticles via Sol gel method and its characterization by using various technique,” Discov. Mater., vol. 2, no. 1, 2022, doi: 10.1007/s43939-022-00022-6.

R. P. Rastogi, N. B. Singh, and S. K. Shukla, “Nano-size copper oxide encapsulated urea - formaldehyde resin film for arsenic (III) removal from aqueous solutions,” Indian J. Eng. Mater. Sci., vol. 18, no. 5, pp. 390–392, 2011.

N. Pandey, S. K. Shukla, and N. B. Singh, “Zinc oxide-urea formaldehyde nanocomposite film as low-cost adsorbent for removal of Cu ( II ) from aqueous solution,” vol. 6, no. 2, pp. 172–178, 2015, doi: 10.5185/amlett.2014.5604.

S. Åsbrink and L. J. Norrby, “A refinement of the crystal structure of copper(II) oxide with a discussion of some exceptional e.s.d.’s,” Acta Crystallogr. Sect. B Struct. Crystallogr. Cryst. Chem., vol. 26, no. 1, pp. 8–15, 1970, doi: 10.1107/s0567740870001838.

M. Liu, “RSC Advances Characterization of the crystalline regions of cured,” RSC Adv., vol. 7, pp. 49536–49541, 2017, doi: 10.1039/C7RA08082D.

S. M. Jabbar, “Synthesis of CuO Nano structure via Sol-Gel and Precipitation Chemical Methods,” vol. 12, no. 4, pp. 126–131, 2016.